Philips VR720/07 - Programming a recording (TIMER); General information

43
Selecting onetime/daily/weekly recordings
In 'DATE' use SELECT to select from the following options:
'ONCE': Recording once
'MO-FR': Repeated daily recordings from Monday to Friday
'WEEK.': Repeated weekly recordings (every week on the same day)
Programme numbers of the 'E1' and 'E2' scart socket
You can also programme recordings from external sources via scart socket
EXT.1 AV. 1 ('E1') or EXT.2 AV. 2 ('E2').
Controlling the digital satellite receiver (Set Top Box)
In 'PROG.' use the button SELECT to switch to the input for a TV channel
from the satellite receiver.
The following may appear on the screen: 'S---'. Now, using the number
buttons 0-9 on the remote control, enter the satellite programme number
for the TV channel you wish to programme.
Warning! In order to utilize this function, the IR satellite control must be
installed according to the instructions in chapter 'IR satellite control'.
'Switching on 'VPS/PDC' in the 'START' input field
Select the 'START' input field using TIMER k . Using SELECT switch on
'VPS/PDC' (']' lights up). If you press SELECT again, you will switch
'VPS/PDC' off (']' goes out).
Attention: If you have programmed a TV channel from the satellite receiver,
you cannot use 'VPS/PDC' for this programme.
5 When all informations are correctly, confirm with OK . The
programming information is stored in a TIMER block.
6 Insert a cassette with an intact security tab (unprotected).
Using 'Tape List'
To save a recording in the 'Tape List' or to use a 'Tape List' cassette, enter
the cassette number using the number buttons 0-9 on the remote control.
The cassette is being checked. You can find more information on the 'Tape
List' in the chapter 'Tape List'. If you don't use the Tape List, interrupt with
STOP h .
7 Switch off with STANDBY/ON m .
The programmed recording will only function when the video
recorder is switched off with STANDBY/ON m .
If any of the TIMER blocks are in use, ' k ' will light up on the video
recorder display.
8 If you programmed a TV channel on the satellite receiver, please
switch on the satellite receiver. The IR satellite control functions only
while the satellite receiver is switched on.
ENGLISH
Programming a recording (TIMER)