For your safety
107708_en_09 PHOENIX CONTACT 7 / 104
1.3 Field of application of the product
1.3.1 Intended use
The AXC F 1152 and AXC F 2152 controllers are modular small-scale controllers. The
AXC F 3152 is a modular controller that can be used for smaller and medium-sized applica-
tions. The devices comply with the IP20 degree of protection and are designed for use in
closed control cabinets or control boxes (terminal boxes) with an IP54 degree of protection
or higher.
The devices are designed for use in industrial environments.
1.4 Product changes
Modifications to the device hardware are not permitted.
Incorrect operation or modifications to the devices can endanger your safety or damage the
devices. Do not repair the devices yourself. If a device is defective, please contact
Phoenix Contact.
1.5 Safety notes
Observe the country-specific installation, safety, and accident prevention regulations.
NOTE: Property damage due to impermissible stress
The IP20 degree of protection (IEC 60529/EN 60529) requires that the device is used in
a clean and dry environment. If you use the device in an environment that is outside of the
specified limits, this may cause damage to the device.
• Do not subject the device to mechanical and/or thermal loads that exceed the speci-
fied limits.
NOTE: Electrostatic discharge
The device contains components that can be damaged or destroyed by electrostatic dis-
charge. When handling the device, observe the necessary safety precautions against
electrostatic discharge (ESD) in accordance with EN 61340-5-1 and IEC 61340-5-1.
NOTE: Device failure due to foreign objects in device
Foreign objects in the device can lead to malfunctions or even device failure.
• Ensure that no foreign objects find their way into the device (e.g., into the vents).
NOTE: Device failure if operated outside the permitted ambient temperature
range
Operating the device in ambient temperatures that are not within the permitted range may
lead to malfunctions or even device failure.
• Ensure that the device is operated within the permitted ambient temperature range,
see Section 14, “Ordering data and technical data”.