Phoenix Auto Equipment
-Address: 2711 East Craig Road Ste #E, North Las Vegas, NV, 89030 United States
- Website: https://www.phoenixautoequipment.com
- Phone: 7025802883
9 / 24
Here are the descriptions for each system setting that can be changed:
Guard control setting: If set to “On” the machine
will not allow a wheel to spin while the safety hood is in the
up position. If set to “Off” the machine will ignore the safety
hood and will spin when the user presses START.
Standardization display setting: Set to 1g or 5g if using
grams to measure. Set to .10 Oz or .25 Oz if you are using
Ounces to measure. This sets the multiple in which the weight
will be displayed on the display board.
Least unbalance value setting. Set between 1 g-40 g
or .1 Oz-1.5 Oz. When the machine spins the wheel, any
unbalance amount less than your setting will display as 0.
Buzzer switch setting. Change to “On” or “Off” to control
the buzzer sound.
Width Input setting. Change width input to Grams
or Ounces. Grams will display “0.” and Ounces will display
“0.0”.
Diameter input setting. Change Diameter input to
Grams or Ounces. Grams will display “0.” and Ounces will
display “0.0”.
Unbalance unit of measurement. “Gr” means the unit will
display in grams.“OS” means the unit will display in ounces.
To Next Page
Loading...
Need help?
General