Phonak Roger Select User Manual

40
9.1. Connecting with other microphones
To connect another microphone to your Roger Select,
follow these steps:
1) Turn on both microphones.
2) Hold the two microphones close together
(within 10 cm/4 inches).
3) Press the Roger Select’s Connect button.
9. Using Roger Select with other
Roger microphones
Roger Select can be combined with other Roger
microphones, e.g. Roger Table Mic II. Using multiple
microphones allows you to hear a bigger group or
multiple distant speakers.

Phonak Roger Select Specifications

General

Battery Life	Up to 8 hours
Operating Range	Up to 20 meters
Compatibility	Roger receivers
Frequency Range	2.4 GHz
Water Resistance	IP54
Charging Time	3 hours