36
Rejecting a call
If you prefer not to answer an incoming call, tap and hold
the center touch key for 2 seconds until the blue light
stops ashing. Using your phone/computer to reject the
call will have the same eect.
Mute call
To mute your voice, tap the center touch key. The red
mute indicator light will light up.
7.4 Further Bluetooth options
Keeping Roger Select in Bluetooth standby mode
Once you have paired your Roger microphone with a
Bluetooth device, its Bluetooth feature will be enabled.
Now you have two options to switch o your Roger
microphone:
A. Press and hold the on/o button will switch
o your Roger microphone and the Bluetooth feature.
You will not be able to make a phone call. When
you switch on your Roger microphone again,
Bluetooth will also be enabled again.
To Next Page
Loading...
