EasyManua.ls Logo

PIAGGIO Beverly 400 I.E - Front and Rear Disc Brake System

PIAGGIO Beverly 400 I.E
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
03_31
Helmet compartment lighting bulb (03_31)
Open the helmet compartment, take out the pressure mounted transparent cover
"D" and replace the bulb.
Front and rear disc brake
The brake disc and pad wear is automatically compensated, therefore it has no effect
on the functioning of the front and rear brakes. For this reason it is not necessary to
adjust the brakes. An excessively elastic brake lever stroke may indicate the presence
of air in the braking circuit or a failure in the braking system. In this case, mainly due
to the importance of brakes to guarantee safe riding conditions, the vehicle should be
taken to an Authorised Service Centre or Dealer.
CAUTION
THE BRAKING ACTION SHOULD BEGIN AFTER ABOUT 1/3 OF THE BRAKE
LEVER STROKE.
CAUTION
HAVE THE BRAKE PADS CHECKED BY THE DEALER ACCORDING TO THE
CHECKS SPECIFIED IN THE SCHEDULED MAINTENANCE TABLE. HOWEVER,
IN THE EVENT OF NOISES COMING FROM THE FRONT AND/OR REAR BRAKE
SYSTEM DURING OPERATION, IT IS ADVISABLE TO HAVE THE BRAKE SYS-
61
3 Maintenance

Related product manuals