Dear Customer,
We thank you for having chosen one of our products, the fruit of extensive and continuous research for a superior product in terms of
safety, reliability and performance.
I
n this manual you will find all the information and advice you need to use your product as safely and efficiently as possible.
D
T2010001-00
Plans and diagrams are supplied as examples at the manufacturer’s discretion; in the pursuit of a policy of continuous development and in-
novation the manufacturer may, without prior warning, make any modifications deemed appropriate.
This document is the property of Gruppo Piazzetta S.p.A.; it may not be divulged in part or in whole to third parties without written per-
mission from Gruppo Piazzetta S.p.A. Gruppo Piazzetta S.p.A. reserves all its statutory rights.
• This manual has been prepared by the manufacturer and consti-
tutes an integral part of the product, and must accompany it
throughout its life. In the event of sale or relocation of the product
make sure this booklet accompanies it, since the information con-
tained in it is addressed to the purchaser and to anyone involved
in the installation, use and maintenance of the product.
• Read the instructions and the technical information contained in
this manual carefully, before proceeding with installation, use or
any repairs.
• The observance of the instructions and technical information in
this manual guarantees the safety of the user and the product, a
more efficient operation and an increased lifespan.
• Careful planning and safety analysis on the part of Gruppo Piaz-
zetta S.p.A. have resulted in a safe product. However, when car-
rying out any operation we recommend that you follow carefully
the instructions contained in this manual, and that you keep it at
your disposal.
• The product’s installation and use should conform to the manu-
facturer’s instructions and to local bylaws.
• Before installing the product read all instruction booklets relevant
to the cladding, the ventilation kit and any other accessory.
• The wall where the product is to be placed should not be of wood
or any other flammable material; furthermore it is important to
maintain safety distances (refer to section entitled “Minimum sa-
fety distances” contained in the stove’s manual for use and main-
tenance).
• Check that the floor where the product is to be installed is exac-
tly level.
• Be especially careful when moving any ceramic components.
• When handling the steel parts of the cladding it is advisable to
use clean cotton gloves to avoid leaving fingerprints that are dif-
ficult to remove at first time of cleaning.
• The assembly of the cover should be undertaken by two people
(follow the assembly instructions in the attached booklet).
• Stop using the product in the event of fault or malfunctioning.
• Keep children informed of safety measures to be followed when
the stove is operational and of the possible danger.
• The product you have purchased may different slightly from the
one illustrated in this booklet since the picture are only given as
an indication and not an exact portrayal.
UNI EN 832 . . . . . . . . . . . . . . . . . . . . . . . . Thermal performance of buildings - Calculation of energy use for heating
UNI EN 13240 . . . . . . . . . . . . . . . . . . . . . . Roomheaters fired by solid fuel - Requirements and test methods
UNI 10683 . . . . . . . . . . . . . . . . . . . . . . . . . Heating appliances fired by wood or other solid biofuels
UNI EN 13384 . . . . . . . . . . . . . . . . . . . . . . Chimneys - Thermal and fluid dynamic calculation methods
UNI 10847 . . . . . . . . . . . . . . . . . . . . . . . . . Chimneys for generators feeded with liquid and solid flues - Maintenance and inspection
Guidelines and procedures
EN 1856-1 . . . . . . . . . . . . . . . . . . . . . . . . . Chimneys - Requirements for metal chimneys - Part 1: System chimney products
EN 1856-2 . . . . . . . . . . . . . . . . . . . . . . . . . Chimneys - Requirements for metal chimneys - Part 2: Metal liners and connecting flue pipes
UNI EN 1443 . . . . . . . . . . . . . . . . . . . . . . . Chimneys – General requirements
UNI 7129 . . . . . . . . . . . . . . . . . . . . . . . . . . Gas installations for domestic use fired by mains gas supply.
Design, installation and maintenance.
DIN 18 891 . . . . . . . . . . . . . . . . . . . . . . . . . Solid-fuel stoves with flue
DIN 51731 class of measurement HP2 . . Fuels
IMPORTANT INFORMATION
D
T2010021-04
REFERENCE STANDARDS
DT2010028-03
H07020660 / DT2000245 - Rev. 03
24
English
To Next Page
Loading...
