To Next PageTo Next Page
Need help?Do you have a question about the Pilz PNOZ and is the answer not in the manual?
General| Category | Safety Relay |
|---|---|
| Protection Class | IP20 |
| Supply Voltage | 24 V DC, 24 V AC, 110-240 V AC (depending on model) |
| Mounting | DIN rail |
| Width | 90mm, depending on model |
| Safety Contacts | 2 or more, depending on model |
| Auxiliary Contacts | Available, depending on model |
| Stop Category | 0 or 1, depending on model |
| Standards | EN ISO 13849-1, EN 60204-1 |
| Rated Voltage | 24V DC or 230V AC, depending on model |
| Operating Temperature | -20°C to +55°C |
| Safety Level | SIL 3, PL e |
Personnel must be familiar with instructions and safety regulations for installation and operation.
Input wiring according to standards, detecting earth faults but not shorts.
Redundant input circuit, detects earth faults but not shorts across pushbutton.
Configuration options for automatic or manual reset of the safety relay.
