Need help?Do you have a question about the Pilz PNOZ X2 and is the answer not in the manual?
General| Category | Safety Relay |
|---|---|
| Width | 22.5 mm |
| Height | 87 mm |
| Depth | 121 mm |
| Mounting | DIN Rail |
| Rated Current per Channel | 6 A |
| Supply Voltage | 24 V DC |
| Contacts | 2 N/O |
| Stop Category | 0 |
| Weight | 200 g |
| Standards | EN 60204-1 |
Details on the validity and usage instructions for the operating manual.
Explanation of warning symbols like DANGER, WARNING, CAUTION, and NOTICE.
Specifies the safety-related interruption of safety circuits and applications.
Information on safety regulations and the required safety assessment.
Details on fulfilling functional safety requirements per EN ISO 13849 and EN 62061.
Describes the positive-guided relay outputs, including safety contacts.
Lists connection possibilities for E-STOP, safety gates, and start buttons.
Details on LED indicators for supply voltage and safety contact status.
Explanation of how input circuits affect the safety contacts and LEDs.
Details on single-channel, dual-channel, and monitored start modes.
Illustrates timing sequences for various operational states.
Formula and parameters for calculating maximum input circuit cable length.
Procedure for testing the shorts across contacts detection function.
Wiring diagrams for AC and DC supply voltage connections.
Wiring examples for E-STOP and safety gate inputs.
Wiring diagram for monitored start configurations.
Wiring examples for feedback loops from external contactors.
Explanation of LED indicators for operational status and errors.
Certifications and general product specifications.
Details on supply voltage, power, frequency, and current ratings.
Voltage, current, and resistance values for input circuits.
Number of contacts, current ratings, and utilisation categories for outputs.
Explanatory notes for safety-related characteristic data like SIL CL and T_M.
Graph showing expected number of cycles before wear failure.
To Next Page
