Pilz PNOZ X2 User Manual

Preface
This document is the original document.
All rights to this documentation are reserved by Pilz GmbH & Co. KG. Copies may be made
for the user's internal purposes. Suggestions and comments for improving this documenta-
tion will be gratefully received.
Source code from third-party manufacturers or open source software has been used for
some components. The relevant licence information is available on the Internet on the Pilz
homepage.
Pilz®, PIT®, PMI®, PNOZ®, Primo®, PSEN®, PSS®, PVIS®, SafetyBUS p®,
SafetyEYE®, SafetyNET p®, the spirit of safety® are registered and protected trademarks
of Pilz GmbH & Co. KG in some countries.
SD means Secure Digital

Pilz PNOZ X2 Specifications

General

Category	Safety Relay
Width	22.5 mm
Height	87 mm
Depth	121 mm
Mounting	DIN Rail
Rated Current per Channel	6 A
Supply Voltage	24 V DC
Contacts	2 N/O
Stop Category	0
Weight	200 g
Standards	EN 60204-1