Need help?Do you have a question about the Pilz PNOZ X1 and is the answer not in the manual?
General| Type | Safety Relay |
|---|---|
| Supply Voltage | 24 VDC |
| Auxiliary Contacts | 1 N/C |
| Width | 45 mm |
| Mounting | DIN Rail |
| Number of safety contacts | 2 |
| Stop Category | 0 |
| Height | 87 mm |
| Depth | 121 mm |
| Rated current | 6 A |
| Protection class | IP20 |
| Safety Contacts | 2 N/O |
| Operating Temperature Range | -10°C to +55°C |
| Weight | 200 g |
Defines the primary purpose of the safety relay PNOZ X1 and its applications.
Outlines general safety regulations and requirements for using the device.
Details the need for safety assessments and compliance with standards like EN ISO 13849.
Specifies that only competent persons should assemble, install, operate, and maintain the product.
Describes the main functional characteristics and connection options of the PNOZ X1 safety relay.
Details the internal redundancy, self-monitoring, and fault-effectiveness of the safety relay.
Describes different operating modes such as single-channel, automatic start, and manual start.
Details requirements for installing the unit in control cabinets and on DIN rails.
Details wiring guidelines, including safety contacts, auxiliary contacts, fuses, and cable length.
Details common faults like earth faults and contact malfunctions, and how to address them.
Details fuse protection requirements and specifications for both safety and auxiliary contacts.
To Next Page
