Need help?Do you have a question about the Pilz PNOZ XV2 and is the answer not in the manual?
General| Supply Voltage | 24 V DC |
|---|---|
| Width | 45 mm |
| Depth | 121 mm |
| Rated Current | 6 A |
| Protection Class | IP20 |
| Safety Category | Cat. 4 |
| Stop Category | 0 |
| Standards | EN 60204-1 |
| Operating Modes | Single-channel |
| Operating Temperature Range | -10 - 55 °C |
Defines the primary function of the safety relay PNOZ XV2.1 for safety-related interruption.
References safety regulations and the requirement for a safety assessment.
Explains the necessity of a safety assessment before using the device.
Specifies that only competent persons should assemble, install, and operate the product.
Details the types of relay outputs and available connection options for E-STOP and safety gates.
Highlights circuit redundancy, self-monitoring, and automatic testing of safety functions.
Explains how to set the delay time for safety contacts using a screwdriver.
Explains single/dual channel operation, automatic start, and monitored start modes.
Covers cabinet installation, DIN rail mounting, and vertical securing methods.
Covers terminal connections, cable types, EMC measures, and operational earth connection.
Details the procedure for testing shorts across contacts for safety.
Outlines required checks for safety contacts and functional diagnostics.
Details common faults like earth faults, contact issues, and LED indicators.
Details switch-on and delay-on de-energisation times.
Specifies safety levels (PL, SIL CL) and failure rates for operating modes.
To Next Page
