Need help?Do you have a question about the Pilz PNOZ X9P and is the answer not in the manual?
General| Supply voltage | 24 V DC |
|---|---|
| Number of Test Outputs | 0 |
| Mounting Type | DIN rail |
| Width | 45 mm |
| Height | 94 mm |
| Depth | 121 mm |
| Response Time | 20 ms |
| Standards | EN 60204-1, EN ISO 13849-1 |
| Terminal Type | Screw terminal |
Covers document validity, usage instructions, and definition of safety symbols.
Details safety regulations, assessment, intended use, and personnel requirements.
Describes relay/semiconductor outputs, connections, LEDs, and safety aspects.
Illustrates terminal layouts for DC and AC/DC voltage types.
Explains input circuit conditions and various operating modes.
Covers timing diagrams, legend, and unit installation procedures.
Details wiring, EMC measures, and testing for shorts across contacts.
Shows wiring for supply voltage and E-STOP/safety gate input circuits.
Illustrates wiring for light guards, start circuits, and semiconductor outputs.
Covers feedback loop configurations and variations in start circuits.
Explains unit operation, LED status, output testing, and fault conditions.
Covers interference issues and physical dimensions of the unit.
Details certifications, electrical specs, input/output data, and utilization categories.
Lists thermal current, timing, environmental, and mechanical specifications.
Provides certifications, electrical specs, and input/output data for DC models.
Lists thermal current, timing, environmental, and mechanical specs for DC models.
Details SIL/PL ratings, standards, and interpretation of safety data.
Illustrates contact service life based on switching current and utilization.
Covers terminal removal, product ordering, and conformity statement.
To Next Page
