Need help?Do you have a question about the Pilz PNOZ X3.1 and is the answer not in the manual?
General| Type | Safety Relay |
|---|---|
| Number of Safety Contacts (NO) | 3 |
| Number of Auxiliary Contacts (NC) | 1 |
| Mounting Type | DIN Rail |
| Rated Current | 6 A |
| Protection Class | IP20 |
| Response Time | 20 ms |
| Stop Category | 0 |
| PL e according to EN ISO 13849-1 | PL e |
| Category 4 according to EN 954-1 | Category 4 |
| SILCL 3 according to IEC 62061 | SILCL 3 |
| SIL 3 according to IEC 61508 | SIL 3 |
| Weight | 200 g |
| Contact Configuration | 3NO + 1NC |
Defines the period for which this manual is valid.
Guidance on how to read and understand the operating manual.
Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE symbols.
Specifies the correct applications and prohibited uses of the safety relay.
Outlines relevant safety regulations and directives for the product.
Details the need for a safety assessment of the plant or machine.
Specifies the qualifications needed for operating and maintaining the unit.
Conditions that may void the product warranty and limit liability.
Instructions for environmentally sound disposal of the safety relay.
Essential safety notes, including overvoltage and insulation requirements.
Describes redundancy, self-monitoring, and automatic testing of safety functions.
Illustrates the unit's internal wiring and external terminal connections.
Details single-channel, dual-channel, automatic, and monitored start modes.
Procedure for testing and detecting shorts across input circuits.
Explains the meaning of LEDs for power, input status, and output signals.
Provides the physical dimensions of the unit in millimeters and inches.
Shows expected service life based on switching current and load type.
Confirms product compliance with EU machinery directive 2006/42/EC.
To Next Page
