Need help?Do you have a question about the Pilz PNOZ X8P and is the answer not in the manual?
General| Type | PNOZ X8P |
|---|---|
| Number of Safety Contacts | 8 |
| Number of Auxiliary Contacts | 4 |
| Operating Voltage | 24 V DC |
| Rated Voltage | 24 V DC |
| Response Time | 20 ms |
| Mounting Type | DIN Rail |
| Stop Category | 0 |
| Width | 45 mm |
| Number of Test Outputs | 1 |
| Max. Switching Current | 6 A |
| Standards | EN 60204-1, EN ISO 13849-1 |
| Max. Switching Voltage | 250 V AC |
Explains warning symbols (DANGER, WARNING, CAUTION, NOTICE) and their meanings.
Describes the purpose and approved applications of the PNOZ X8P safety relay.
Outlines relevant safety regulations and directives applicable to the product.
Explains the requirement for a safety assessment as per the Machinery Directive.
Specifies the qualifications and responsibilities for personnel handling the product.
Highlights critical safety notes and precautions for safe operation of the unit.
Details the inherent safety features of the relay, including redundancy and self-monitoring.
Shows electrical block diagrams and terminal layouts for DC voltage variants.
Shows electrical block diagrams and terminal layouts for AC voltage variants.
Explains the various operational modes of the safety relay, such as single-channel.
Illustrates the timing sequences of input, output, and control signals.
Illustrates the expected operational lifespan based on switching current and load.
To Next Page
