Need help?Do you have a question about the Pilz PNOZ X2.8P and is the answer not in the manual?
General| Number of safety contacts | 2 |
|---|---|
| Number of auxiliary contacts | 1 |
| Number of test outputs | 0 |
| Operating voltage | 24 V DC |
| Supply voltage | 24 V DC |
| Rated voltage | 24 VDC |
| Response time | 20 ms |
| Stop Category | 0 |
| Contact material | AgNi |
| Max. switching current | 8 A |
| Mechanical service life | 10, 000, 000 cycles |
| Electrical service life | 100, 000 cycles |
| Protection class | IP20 |
| Width | 22.5 mm |
| Height | 100 mm |
| Type | Safety relay |
Specifies the validity period of the product documentation.
Provides guidance on how to effectively use the operating manual.
Explains important symbols used in the manual for warnings and notices.
Defines the applications for which the safety relay is designed.
Outlines relevant safety standards and directives to be followed.
Emphasizes the necessity of safety assessment before device usage.
Specifies requirements for personnel involved in product assembly and operation.
Details conditions that invalidate warranty and liability claims.
Provides guidance on the proper disposal of the electronic device.
Highlights crucial safety notes and precautions for safe operation.
Describes the built-in safety functions and redundancy of the relay.
Explains the different operational modes of the safety relay.
Visually represents the operational sequences and timing of the unit.
Lists common faults, interference causes, and troubleshooting steps.
Provides the physical dimensions of the unit.
Offers additional data, including service life information and safety ratings.
To Next Page
