Pilz PNOZ X1 User Manual

PNOZ X1
Operating Manual PNOZ X1
19045-EN-10
| 10
Preparing for operation
Supply voltage/input circuit AC DC
E-STOP
S1
A1
L1
A2
N
S1
A1
L+
A2
L-
Safety gate
N
Start circuit Automatic start Manual start
E-STOP/safety gate
Y1
Y2
S3
NOTICE
In the event of an automatic start or manual start with bridged start
contact (fault):
The unit starts up automatically when the safeguard is reset, e.g. when the
E-STOP pushbutton is released. Use external circuit measures to prevent
an unexpected restart.
Feedback loop Automatic start Manual start
Contacts from external contactors
K5
K6
K5
L1
K6
Y1
Y2
S3
N
13 (23, 33)
14 (24 ,34)
Legend
} S1: E-STOP pushbuttons
} S3: Start button

Pilz PNOZ X1 Specifications

General

Type	Safety Relay
Supply Voltage	24 VDC
Auxiliary Contacts	1 N/C
Width	45 mm
Mounting	DIN Rail
Number of safety contacts	2
Stop Category	0
Height	87 mm
Depth	121 mm
Rated current	6 A
Protection class	IP20
Safety Contacts	2 N/O
Operating Temperature Range	-10°C to +55°C
Weight	200 g