Need help?Do you have a question about the Pilz PNOZ s5 and is the answer not in the manual?
Specifies the safety relay's purpose and acceptable applications according to safety standards.
Outlines relevant safety regulations and directives applicable to the product's use.
Details the necessity of performing a safety assessment for the overall plant/machine.
Defines the requirements for personnel involved in installation, operation, and maintenance.
Highlights crucial safety precautions and conditions for safe operation of the unit.
Describes the relay outputs, connection options for input devices, and available modules.
Describes the built-in safety mechanisms and redundancy of the safety relay.
Presents the wiring diagram and terminal layout for the 24 VDC version of the safety relay.
Illustrates the wiring diagram and terminal configuration for the 48-240 VAC/DC variant.
Details single-channel, dual-channel operation with and without shorts detection.
Explains automatic, manual, and monitored start modes with their respective conditions.
Describes the unit's function to test safety gates during start-up.
Illustrates timing sequences for automatic and manual start operations.
Shows timing for monitored start with rising and falling edges, including waiting periods.
Diagram illustrating the reset procedure and start-up test sequence.
Instructions for installing the base unit without or with a contact expansion module.
Guidelines for mounting the safety relay within a control cabinet.
Provides essential information and precautions regarding the unit's electrical connections.
Explains how to set operating mode and delay time using rotary switches.
Describes issues like welded contacts and delayed contacts opening prematurely.
Presents SIL/PL values and highlights the importance of service life graphs for data validity.
To Next Page
General
