Need help?Do you have a question about the Pilz PNOZ s11 and is the answer not in the manual?
General| Type | Safety relay |
|---|---|
| Number of safety contacts | 3 |
| Rated voltage | 24 V DC |
| Rated current | 6 A |
| Supply voltage | 24 V DC |
| Semiconductor output | No |
| Stop Category | 0 |
| PL e acc. EN ISO 13849-1 | Yes |
| Category 4 acc. EN 954-1 | Yes |
| SILCL 3 acc. IEC 62061 | Yes |
| SIL 3 acc. IEC 61508 | Yes |
| Width | 22.5 mm |
| Contact configuration | 3 N/O |
| Auxiliary contacts | 1 |
| Operating principle | Single-channel operation |
| Standards | EN 60204-1 |
Explains the meaning of warning symbols used in the document for safety and information.
Defines the product's purpose, applicable standards, and safety guidelines.
Highlights the need for safety assessment according to the Machinery Directive.
Outlines requirements for personnel and conditions invalidating warranty.
Details the safety functions and requirements met by the unit.
Presents the functional block diagram and terminal configuration.
Illustrates the timing of input signals and output states.
Provides guidelines for installing the safety relay in a control cabinet.
Details the steps required before the unit can be operated.
Explains how the feedback loop is connected to various base units.
Shows an application example for a single device setup.
Illustrates an application example using the unit with PNOZ s4.
Describes the meaning of LED indicators for status and errors.
Details potential faults and malfunctions and their remedies.
Covers general certifications, voltage, current, and power specifications.
Details input parameters and relay output contact ratings.
Specifies utilisation categories for AC and DC loads.
Provides environmental conditions and timing specifications.
Details mechanical properties, EMC compatibility, and vibration resistance.
Presents key safety parameters like SIL and PL values for the product.
Describes interface classes and specific values according to ZVEI standard.
Discusses service life graphs and the PFH value for safety.
Details voltage reduction requirements for operation at higher altitudes.
Lists product types, features, terminals, and order numbers.
States the product's compliance with EU machinery directives.
To Next Page
