Need help?Do you have a question about the Pilz PNOZ s50 and is the answer not in the manual?
General| Operating Voltage | 24 V DC |
|---|---|
| Rated Voltage | 24 V DC |
| Rated Current | 6 A |
| Category | 4 |
| PL | e |
| SILCL | 3 |
| Auxiliary Contacts | 1 N/O |
| Semiconductor Output | 1 PNP |
| Response Time | 20 ms |
| Safety Category | EN ISO 13849-1 |
| Weight | 190 g |
Specifies the manual's validity period for PNOZ s50 and outlines its content.
Explains DANGER, WARNING, CAUTION, NOTICE, and INFORMATION symbols.
Describes the internal structure and components of the PNOZ s50 unit.
Lists the items included with the PNOZ s50, such as the relay, chip card, and documentation.
Highlights the key features like semiconductor outputs, inputs, supply voltage, and configuration options.
Illustrates the device's physical layout, including terminals, display, and LEDs.
Defines the product's intended applications and lists prohibited uses, including modifications.
Covers requirements for qualified personnel, warranty, liability, and disposal.
Explains the PNOZ s50's role in safety-related shutdown and its configuration capabilities.
Details how the device switches power circuits on/off, handles feedback, and provides outputs.
Describes the process of switching power circuits on and off using fast shutdown inputs.
Explains the slow shutdown function for power circuits using inputs S35 and S36.
Details the input conditions required for both fast and slow shutdown operations.
Explains the setup and function of feedback loops Y1 and Y2 for monitoring loads.
Describes the function and assignment of test pulse outputs T0 and T1 for feedback loops.
Details the function of fault, status, and test pulse outputs (O3, O4, O5, T0, T1).
Explains methods for testing outputs, including regular off/on tests and shorts testing.
Covers how to view status, configure the device, and understand messages.
Describes the device's configuration settings, accessible via a rotary knob.
Describes how to use the chip card for storing and transferring device configuration data.
Defines reaction time and factors influencing it for safety-related operations.
Provides instructions for control cabinet installation, DIN rail mounting, and handling.
Shows the physical dimensions of the PNOZ s50 unit with spring-loaded terminals.
Specifies required distances between devices for proper ventilation and heat dissipation.
Covers general wiring rules, input/output wiring, and detailed pin assignments for connectors.
Details wiring requirements for noise immunity, EMC, and preventing short circuits.
Provides detailed pin assignments for connectors X1, X2, X3, and X4.
Specifies requirements for the device's supply voltage, including tolerance and protection.
Details requirements for the supply voltage of the power circuits, including tolerance.
Describes the power circuit configuration and dual-pole outputs.
Explains the configuration of inputs for fast and slow shutdown.
Details how to configure inputs for fast shutdown using single-pole or dual-pole outputs.
Explains how to configure inputs for slow shutdown and the conditions for its use.
Describes the configuration of status outputs for monitoring load and faults.
Details how to configure feedback loops and use test pulses.
Explains how to navigate the device's display menu and make settings using the rotary knob.
Provides instructions on how to use the device's rotary knob for navigation and selection.
Details the steps for configuring device settings via the rotary knob interface.
Explains the password protection feature for accessing and changing device configuration.
Describes how to use the chip card for storing and transferring device configuration data.
Provides instructions on how to properly insert the chip card into the device.
Details the structure and navigation of the device's display menus for configuration.
Presents the hierarchical structure of the device's configuration menus.
Explains how to navigate menus using icons and text fields and enter values.
Describes messages and actions during a cold start, including chip card and memory comparisons.
Details the status indicators for device diagnostics displayed on Level 1 of the menu.
Describes the process for entering the password to access configuration settings.
Details the parameters available for configuring the device in Level 3 of the menu.
Instructions for configuring the supply voltage for power circuits B1/B2.
Details how to configure feedback loops Y1 and Y2, including test pulses and logic.
Explains how to configure overexcitation time and reduced voltage for power circuits.
Details how to set the offset for the number of operations for power circuits.
Provides options for restarting the device after configuration changes.
Explains the meaning of LEDs for device status and fault indication.
Details the status indicated by each LED (Run, Power, Out 1, Out 2, I/O Fault, Fault).
Describes how to view error stack entries and current error messages on the device display.
Explains the information contained in error stack entries, including category and time stamp.
Lists current error messages, their causes, and user-rectifiable remedies.
Describes the three methods for resetting an 'I/O Fault' and restarting the device.
Introduces examples for configuring the PNOZ s50 and notes on their applicability.
Provides an example application using the PNOZ s50 for controlling mechanical holding brakes.
Lists the properties of the PNOZ s50 relevant to controlling mechanical holding brakes.
Details the specific parameter settings for the mechanical holding brake example.
Illustrates the wiring connection example for two mechanical holding brakes.
Provides general product data such as model number and approvals.
Details electrical specifications including supply voltage, current, and isolation.
Lists specifications for test pulse outputs, such as current and isolation.
Details specifications for single-pole and dual-pole semiconductor outputs.
Covers operating temperature, EMC, vibration, and physical dimensions.
Details potential isolation between different parts of the device.
Provides details on mounting, materials, connection types, and dimensions.
Presents safety characteristic data (SIL, PL, PFH, PFD) for safety functions.
Lists order numbers for the PNOZ s50 C product type.
Provides order numbers for accessories like chip cards, holders, and terminals.
A checklist to record device parameters during commissioning and inspection.
To Next Page
