Pilz PNOZ s50 User Manual

Commissioning
OperatingManualPNOZs50
1002194EN02
47
Overview Displayformat Description
Counter1or
Counter2
Switchtomenuto
setthecounterfor
thenumberofoper
ationsforpowercir
cuitsO1+/O1or
O2+/O2
Counter 1
Set:
Cancel Store
Counter 2
Counter1–Eventcounter1Configure
numberofoperationsforloadatpowercir
cuitO1+/O1
Counter2–Eventcounter2Configure
numberofoperationsforloadatpowercir
cuitO2+/O2
########Oldcounterstatus
Set:Enternewcounterstatus,e.g.when
ausedloadisapplied
Valuerange:0…99999999
Store–Confirmentry
Cancel–Exitmenuwithoutconfirmingthe
entry
Changepassword
PIN
Changepassword
PIN
Old _ _ _ _ _ _
New _ _ _ _ _ _
Cancel Store
OldEntertheoldpassword
NewEnterthenewpassword
Cancel–Exitmenuwithoutconfirmingthe
entry
Store–Adoptnewpassword
DeniedWrongPIN
Errormessage
Denied
Wrong PIN
Youenteredanincorrectpassword.
Restartafterchangingconfiguration
Adoptchanges
andReboot
Restartandadopt
configuration
Adopt changes
and Reboot
Are you sure?
No Yes
No–Donotrestart
Yes–Restart
6.2.5.5 Restartdevice
Restartthedeviceifyouhavechangedtheconfiguration.Thechangedconfigurationisad
optedduringarestart.
Therearetwooptionsforrestartingthedeviceoncetheconfigurationiscomplete.
Optionone:
1. Switchoffthedevice'ssupplyvoltage(terminalsA1andA2).
2. Switchthedevice'ssupplyvoltagebackon.
Theconfigurationisadopted.
Optiontwo:
1. SelectRebootinmenulevel3.
2. SelectYesandpresstherotaryknob.
Thedeviceisrestartedandtheconfigurationisadopted.

Pilz PNOZ s50 Specifications

General

Brand	Pilz
Model	PNOZ s50
Category	Relays
Language	English