Need help?Do you have a question about the Pilz PNOZ s7.1 and is the answer not in the manual?
General| Type | Safety Relay |
|---|---|
| Safety inputs | 2 |
| Number of Safety Contacts | 3 |
| Number of auxiliary contacts | 1 |
| Contact configuration | 3 N/O, 1 N/C |
| Input Voltage | 24 V DC |
| Supply voltage | 24 V DC |
| Rated voltage | 24 V DC |
| Rated current | 6 A |
| Width | 22.5 mm |
| Terminal type | Screw terminals |
| Standards | EN 60947-5-1, EN 60204-1 |
| Weight | 200g |
| Operating Temperature | -10 to 55 °C |
| Operating temperature range | -10 to 55 °C |
Covers document validity, usage instructions, and retention guidelines for future reference.
Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE symbols used in the manual.
Details the intended use of the PNOZ s7.1 and relevant safety regulations for operation.
Outlines safety assessment requirements and the need for qualified personnel for device operation.
Addresses warranty conditions, liability limitations, and proper disposal procedures for electronic devices.
Provides critical safety notes, including overvoltage category considerations for user protection.
Provides guidelines for securely mounting the safety relay within a control cabinet and on DIN rails.
Demonstrates a basic application setup for the PNOZ s7.1 operating as a standalone device.
Illustrates how the PNOZ s7.1 can be used as an expansion module for the PNOZ s4 safety relay.
Describes mandatory checks for safety contact functionality during operation and maintenance.
Details the meaning of LED indicators for power, input status, output status, and fault conditions.
Specifies electrical characteristics, supply voltage, input current, and voltage tolerance for the module.
Details the utilization categories, current ratings, and fuse protection for the safety relay outputs.
Provides explanations for safety-related data like SIL CL, PLe, PFH, and mission time (Tm).
Classifies the input interfaces according to ZVEI standards, including drain parameters.
Classifies the output interfaces according to ZVEI standards, including source parameters.
Illustrates the expected service life of relay outputs based on switching current and load type.
Provides instructions on how to safely disconnect and remove the plug-in terminals from the module.
Lists product types, features, connection types, and corresponding order numbers for purchasing.
Confirms compliance of the product with EU directives for machinery.
To Next Page
