Appendix
Operating Manual PSEN sc M 3.0/5.5 08-17
1005387-EN-05
| 139
19 Appendix
19.1 Check list
The check list below is intended as an aid in for the following work on a safety laser scan-
ner of the PSEN sc M 3.0/5.5 08-17 series:
} During commissioning,
} recommissioning, and
} running the specified regular check.
Note that the check list is not intended to replace the plant-specific safety analysis required
for commissioning/recommissioning, nor the resulting inspections and actions.
INFORMATION
Commissioning, recommissioning and regular inspection may only be car-
ried out by qualified personnel.
We recommend that you keep the completed check list and store it with the machine docu-
mentation for reference.
Action OK Not OK Notes
Check the safety category/standards
Does the safety category of the safety
laser scanner match the safety cat-
egory required for the plant/machine?
Have the standards applicable for the
plant/machine been considered?
Check ambient conditions for safety
laser scanner
Have the environmental conditions
been met (see Ambient
conditions [ 50])?
Have the technical details been met for
all the safety laser scanner compon-
ents?
Check access points to the danger
zone
Are all access points to the danger
zone safeguarded either by safety
laser scanners or by other safeguards?
To Next Page
Loading...
Need help?
General
