Need help?Do you have a question about the Pilz PSEN sl-1.0p 1.1 and is the answer not in the manual?
General| Brand | Pilz |
|---|---|
| Model | PSEN sl-1.0p 1.1 |
| Category | Accessories |
| Language | English |
Information on the validity period of the product documentation and updates.
Guidelines on how to effectively use the product manual for instruction and reference.
Explanation of DANGER, WARNING, CAUTION, and NOTICE symbols used in the manual.
Describes the safety function, required standards (EN 60947-5-3, EN 62061, EN ISO 13849-1), and actuator compatibility.
Outlines requirements for safety assessment, use of qualified personnel, and EMC-compliant installation.
Critical safety warnings regarding manipulation/defeat of the safeguard and connector protection.
Features related to transponder technology for presence detection, including actuator types and device specifications.
Details of dual-channel operation, including safety outputs, inputs, signal output, and LEDs.
Information on magnetic guard locking for process protection and its associated input for control.
Explains the conditions under which the signal output Y32 provides a high signal (actuator in response range).
Describes how feasibility errors are detected for safety inputs S11 and S21 and the resulting operation lock.
Details the operation and monitoring of the magnetic guard locking device and magnet, including switching and testing.
Specifies the maximum permitted lateral and vertical offset for the actuator and switch installation.
Factors affecting maximum cable length and voltage drop at safety switches, including cable resistance and current.
Provides recommendations for cable cross sections based on load capacity and maximum cable length.
Details the pin configuration of the 8-pin M12 connector, terminal designations, and associated wire colours.
Illustrates the connection diagram for a single safety switch connected to an evaluation device.
Shows the connection diagram for multiple safety switches connected in series to a PLC or evaluation device.
Provides a specific wiring example for connecting the safety switch to a PNOZ s3 evaluation device.
Offers a wiring example for connecting the safety switch to a PNOZmulti evaluation device.
Requirements for installation measures as per EN ISO 14119, including permanently secured screws and concealment.
Specific installation notes for the PSEN sl-1.0fm actuator regarding its movable metal plate and recess.
Step-by-step guide for installing the safety gate system on a swing gate, including alignment and fastening.
Step-by-step guide for installing the safety gate system on a sliding gate, including alignment and fastening.
Description of the 'Power/Fault', 'Safety Gate', 'Lock', and 'Input' LEDs and their operational meanings.
Explains how the 'Input' and 'Power/Fault' LEDs indicate errors or partial operation states.
Details how error codes are indicated by flashing LEDs and how to interpret the number and sequence of flashes.
Provides general information including approvals, sensor mode, coding level, design, and classification.
Lists electrical specifications such as supply voltage, tolerance, power, inrush current, and switching frequency.
Encompasses switch-on delay, actuator delay-on de-energisation, risk time, and supply interruption times.
Outlines mechanical properties like holding force, offset limits, actuator type, and operating distances.
Information regarding FCC and IC compliance for radio approval in USA and Canada.
Presents safety characteristic data like PL, SIL, PFHD, PFD, and Tm for compliance with safety standards.
Lists product types, features, connection types, and order numbers for safety gate systems.
Details available accessories, specifically mounting brackets for swing and sliding gates, with their order numbers.
States that the product meets EU machinery directive requirements and provides a link to the declaration.
Contact information for technical support in Brazil, Canada, Mexico, and USA.
Contact information for technical support in China, Japan, and South Korea.
Contact information for technical support in Austria, Belgium, France, Germany, Ireland, and Italy.
Provides the international hotline number and email for global technical support.
To Next Page
