Hunter-Pro Series Captain 8 - Installation Guide
68
The procedure is as follows:
a) Enter the ON/OFF (physical) output screen.
b) Select the output type that will trigger it. In this example, it is the default “Zone open”
output type.
c) Set which partition/s can trigger this output type.
d) Set the polarity of the output.
2. PGM output (only in Captain 8):
Set the "Burgl. -All Types" output type (i.e. all the burglary output types) to trigger the PGM
output. This means that the PGM output will be triggered with any burglary zone alarm.
To Next Page
Loading...
