EasyManua.ls Logo

Pioneer AVIC-F310BT User Manual

Pioneer AVIC-F310BT
137 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operation Manual
GPS NAVIGATION AUDIO SYSTEM
AVIC-F310BT
Be sure to read Important Information for the user first!
Important Information for the user includes the
important information that you must understand before
using this navigation system.
English

Table of Contents

Other manuals for Pioneer AVIC-F310BT

Question and Answer IconNeed help?

Do you have a question about the Pioneer AVIC-F310BT and is the answer not in the manual?

Pioneer AVIC-F310BT Specifications

General IconGeneral
AutoYes
Marine (chartplotters, sounders)No
Map view options2D/3D
I/O ports1 x RCA Pre-Outs 1 x SD Card In 1 x Aux. In (Rear) 1 x USB In (Rear)
InterfaceUSB
Audio systemMOSFET 50W x 4 Amplifier
GPS receiverL1, C/Acode GPS SPS
Storage capacity4096 MB
Form factorFixed
Product colorBlack
Display diagonal4.3 \
Display resolution480 x 272 pixels
Native aspect ratio16:9
Compatible memory cardsSD, SDHC
Bluetooth version2.0+EDR
USB 2.0 ports quantity1
Audio formats supportedAAC, MP3, WAV, WMA
Video formats supportedMPEG4, WMV

Summary

Operation Manual

Important Information for the user

Advises users to read important safety and operational information before using the system.

Introduction

Manual overview

Explains how to navigate the manual and its conventions.

How to use this manual

Provides guidance on finding procedures and understanding terminology.

Terminology

Explains conventions like button naming, screen titles, and key descriptions.

Definitions of terminology

Defines terms like "USB storage device" and "SD memory card".

Resetting the microprocessor

Explains how to reset the microprocessor and under which conditions it's necessary.

Before you start

Checking part names and functions

Identifies and explains the functions of the head unit's buttons and components.

Inserting and ejecting a disc

Provides instructions on how to insert and eject discs.

Inserting and ejecting an SD memory card

Details procedures for inserting and ejecting SD memory cards with cautions.

Plugging and unplugging a USB storage device

Explains how to connect and disconnect USB storage devices safely.

Connecting and disconnecting an iPod

Covers connecting and disconnecting an iPod using a USB interface cable.

Protecting your product from theft

Advises on removing the detachable device to prevent theft.

Flow from startup to termination

Outlines the basic steps for starting and turning off the navigation system.

On first-time startup

Guides the user through initial setup, including language selection.

How to use the detachable device

Checking part names and functions

Identifies parts of the detachable device, including USB connector and SD card slot.

Removing and attaching the detachable device

Explains how to detach and reattach the main unit from the head unit.

Installing the battery

Provides cautions regarding battery replacement and advises professional service.

Turning on the detachable device

Explains how to turn on the detachable device and its functions in "Detach mode".

Monitoring the battery status

Shows how to check the battery status indicator on the system.

Connecting with your PC

Guides users on connecting the detachable device to a PC using a USB cable.

How to use the navigation menu screens

Screen switching overview

Illustrates how to navigate between different menu screens.

What you can do on each menu

Describes the functions accessible from the Map, Navigation, Settings, and Phone menus.

Operating menu screens (e.g. “Navigation Menu” screen)

Explains how to navigate through menu screens and their elements.

Operating the on-screen keyboard

Explains how to use the on-screen keyboard for text input.

How to use the map

How to read the map screen

Explains the various elements displayed on the 2D map screen.

Changing the scale of the map

Details how to adjust the map's zoom level.

Switching the map orientation

Explains how to switch between "Heading up" and "North up" map orientations.

Displaying POI on the map

Details how to display Point of Interest icons on the map based on categories.

Switching the map between 2D and 3D

Explains how to switch the map display between 2D and 3D views.

Setting the map colour change between day and night

Guides on how to set the map colour scheme for day and night visibility.

Setting the speed limit display

Toggles the display of the current road's speed limit on the map.

Setting a route to your destination

The basic flow of creating your route

Outlines the step-by-step process for planning a route.

Modifying the route calculation conditions

Allows adjustment of route calculation parameters like avoiding toll roads or ferries.

Adding a waypoint

Explains how to add intermediate stops to a route.

Checking and modifying the current route

Checking the current itinerary

Guides on how to review the route details and planned stops.

Editing waypoints

Explains how to modify, add, or delete waypoints in a route.

Deleting a waypoint

Details how to remove a waypoint from a route.

Sorting waypoints

Explains how to reorder waypoints in a route.

Cancelling the route guidance

Provides steps to stop current route guidance and optionally skip waypoints.

Searching for and selecting a location

Searching for a location by address

Guides on how to find locations using address details like city and street.

Searching for POIs by specifying a category first

Explains how to search for POIs by selecting a preset category.

Searching for a POI directly from the name of the facilities

Guides on finding POIs by spelling out their names.

Searching for a nearby POI

Describes how to find POIs in the vicinity of the current location.

Selecting destination from “Favourites”

Guides on selecting previously saved locations from the Favourites list.

Selecting a location you searched for recently

Covers accessing previously searched locations from the History list.

Searching for a location by coordinates

Details how to find a location using latitude and longitude coordinates.

Registering and editing locations

Registering a location into “Favourites”

Guides on saving locations for quick access, either by search or map scroll.

Editing registered locations

Covers modifying existing Favourites entries like name, phone number, or location.

Sorting the entry in “Favourites”

Explains how to sort Favourites entries by distance, alphabetically, or by recent use.

Deleting the entry in “Favourites”

Details how to remove saved locations from Favourites.

Registering and editing your home

Covers setting and modifying the home location for quick routing.

Using traffic information

Checking all traffic information

Shows how to view a list of all traffic information received, sorted by distance.

How to read traffic information on the map

Explains how traffic events are displayed using icons and lines on the map.

Setting an alternative route to avoid traffic jams

Describes how the system automatically finds alternate routes to bypass traffic.

Checking for traffic jams automatically

Explains how the system recommends new routes based on traffic jams.

Using hands-free phoning

Displaying the Phone Menu

Shows how to access the Phone Menu for hands-free calling functions.

Registering your mobile phone

Guides on connecting a mobile phone via Bluetooth, including registration methods.

Searching for nearby phones

Details how to search for and register nearby Bluetooth-enabled phones.

Pairing from your mobile phone

Describes how to initiate the connection from the mobile phone itself.

Connecting and disconnecting a registered mobile phone

Covers automatic and manual connection/disconnection of registered phones.

Making a phone call

Introduces various ways to initiate a phone call.

Answering an incoming call

Details how to manually answer an incoming call.

Transferring the phone book

Guides on transferring contact information from a mobile phone to the system.

Setting the phone volume

Explains how to adjust ringtone and voice volume for hands-free calls.

Setting the automatic rejection function

Guides on setting the system to automatically reject all incoming calls.

Echo cancelling and noise reduction

Describes how to reduce echo and improve sound quality during calls.

Setting automatic connection

Explains how the system automatically connects to a registered phone.

Editing the device name

Guides on changing the Bluetooth device name.

Modifying the general settings for navigation functions

Setting the volume for navigation system

Adjusts the volume for navigation guidance and beeps.

Customising the regional settings

Allows customization of language, time, and units.

Selecting the language

Guides on setting the UI and voice guidance languages.

Setting the time difference

Explains how to adjust the system clock based on time differences.

Changing the unit between km and miles

Sets distance and speed units to kilometers or miles.

Setting the keyboard layout

Allows selection of different keyboard layouts for text input.

Setting “Safe Mode”

Guides on enabling Safe Mode to limit functions while driving.

Inputting the fuel consumption information for calculating the fuel cost

Details how to enter fuel details to estimate trip costs.

Adjusting the response positions of the touch panel (touch panel calibration)

Guides on calibrating the touch screen for accurate input.

Correcting the current location

Explains how to adjust the vehicle's current position on the map.

Adjusting the screen brightness

Explains how to adjust the display brightness.

Turning off the screen

Guides on how to turn off the LCD screen display without affecting voice guidance.

Restoring the default setting

Explains how to reset system settings to factory defaults.

Other functions

Exporting data for “NavGate FEEDS”

Guides on exporting data like fuel details and drive logs to an SD card.

Recording your travel history

Explains how to activate and use the track logger to record driving history.

Exporting and importing the entry in “Favourites”

Covers exporting and importing Favourites data via SD card.

“PC Mode” function

Explains how to connect the detachable device to a PC to recognize it as a drive.

Basic flow of operation

Using the audio source

Lists the available audio sources that can be used with the system.

Switching the audio operation screen

Explains how to switch between different audio sources.

What you can do on each menu

Describes the functions available in various menus like Audio, Function, and Initial Settings.

Using the radio (FM)

Reading the screen

Explains the elements displayed on the FM radio screen.

Operating by hardware buttons

Details how to use hardware buttons for radio functions.

Storing and recalling broadcast frequencies

Guides on saving and retrieving radio station frequencies using preset keys.

Tuning in strong signals

Details how to use local seek tuning for better reception.

Receiving traffic announcements

Explains how to receive traffic announcements (TA) automatically.

Searching for an RDS station by PTY information

Guides on searching for stations based on programme type (PTY).

Using the radio (MW/LW)

Reading the screen

Explains the elements displayed on the MW/LW radio screen.

Storing and recalling broadcast frequencies

Guides on saving and retrieving MW/LW radio station frequencies.

Tuning in strong signals

Details how to use local seek tuning for better MW/LW reception.

Playing audio CDs

Reading the screen

Explains the elements displayed on the CD playback screen.

Operating by hardware buttons

Details how to use hardware buttons for CD playback functions.

Selecting a track from the list

Guides on selecting tracks from a CD-TEXT list for playback.

Play tracks in random order

Explains how to play tracks in a random sequence.

Using advanced sound retriever

Explains the function to enhance compressed audio quality.

Playing music files on ROM

Reading the screen

Explains the elements displayed when playing compressed audio files from ROM.

Operating by hardware buttons

Details hardware button operations for ROM music playback.

Selecting a track from the list

Guides on selecting files or folders from a disc list for playback.

Play tracks in random order

Explains how to play files in a random sequence.

Playback and Pause

Details how to pause and resume playback of files.

Playing music files on USB

Reading the screen

Explains the elements displayed when playing music files from a USB device.

Operating by hardware buttons

Details hardware button operations for USB music playback.

Selecting a file from the list

Guides on selecting files or folders from a USB list for playback.

Setting a repeat play range

Allows repeat playback for current file, folder, or all.

Playing files in random order

Explains how to play files in a random sequence.

Playback and Pause

Details how to pause and resume playback of files.

Using an iPod

Reading the screen

Explains the elements displayed when using an iPod with the system.

Operating by hardware buttons

Details hardware button operations for iPod playback.

Selecting a song from the list

Guides on selecting songs from various categories (playlists, artists, albums) for playback.

Setting a repeat play range

Allows repeat playback for all songs or a single song.

Operating this navigation system's iPod function from your iPod

Controls iPod functions directly from the iPod device.

Playing songs in random order (shuffle)

Explains how to shuffle songs or albums for random playback.

Playing all songs in random order (shuffle all)

Guides on enabling shuffle mode for all songs on the iPod.

Using the AUX source

Switching the auxiliary setting

Guides on enabling the AUX input in the Initial Setting screen.

Selecting “AUX” as the source

Explains how to select AUX as the audio source.

Turning the source off

Turning the source off

Details how to turn off the audio source by holding the SRC/OFF button.

Customising the initial settings

Displaying the “Initial Setting” screen

Guides on accessing the Initial Setting screen for system customization.

Setting the illumination colour

Explains how to select from 10 different illumination colours.

Setting the FM tuning step

Guides on setting the FM tuning step to 50 kHz or 100 kHz.

Setting the rear output and subwoofer controller

Covers settings for rear speaker output and subwoofer connection.

Switching the sound muting/attenuation

Explains options for muting audio during voice guidance.

Audio adjustments

Displaying the “Audio Menu” screen

Guides on accessing the Audio Menu for sound adjustments.

Using balance adjustment

Explains how to adjust front/rear and left/right speaker balance.

Using the equaliser

Details how to adjust audio equalization using presets or manual settings.

Adjusting the equaliser curves

Guides on manually adjusting equalizer bands, frequency, level, and Q factor.

Adjusting loudness

Explains how to use the loudness function to compensate for low-volume deficiencies.

Using subwoofer output

Details how to turn subwoofer output on/off and set phase.

Using the high pass filter

Explains how to use the HPF to filter low frequencies from front/rear speakers.

Adjusting source levels

Guides on adjusting the volume level for each audio source (SLA).

Enhancing bass (Bass)

Explains how to boost bass sounds for enhanced audio.

Returning the Navigation System to the Default or Factory Settings

Setting items to be deleted

Provides a table detailing which settings are cleared by each reset method.

Appendix

Troubleshooting

Lists common problems, their causes, and solutions for the navigation system.

Problems with the navigation screen

Details issues like power not turning on, screen freezing, or positioning errors.

Problems with the audio screen

Lists audio-related issues such as CD playback errors or no sound.

Problems with the phone screen

Covers issues with phone dialling or Bluetooth connection failures.

Messages and how to react to them

Explains system messages and suggested actions for navigation and audio functions.

Messages for audio functions

Lists error messages related to CD, USB, and iPod playback.

Positioning technology

Explains how GPS positioning and map matching work.

Map matching

Explains how the system corrects positioning errors by matching to roads.

Handling large errors

Discusses how GPS and map matching minimize positioning errors.

When positioning by GPS is impossible

Lists conditions under which GPS positioning may fail.

Conditions likely to cause noticeable positioning errors

Identifies scenarios that can lead to positioning inaccuracies.

Route setting information

Provides information on how routes are set and the system's search specifications.

Handling and care of discs

Offers precautions for handling discs to ensure proper playback.

Built-in drive and care

Provides guidelines for using and maintaining the built-in CD/DVD drive.

Playable discs

Lists the types of discs (CDs) compatible with the system.

Detailed information for playable media

Discusses compatibility and playback issues for CD-R/RW, USB, and SD media.

Media compatibility chart

A chart detailing compatibility for file systems, folder/file counts, and playable file types.

Bluetooth

Provides information about Bluetooth technology and its trademarks.

WMA

Explains WMA and its compatibility, including Microsoft Corporation trademarks.

AAC

Explains AAC and its compatibility, including notes on iTunes.

Detailed information regarding connectable iPods

Provides important cautions regarding iPod data loss and handling.

Using the LCD screen correctly

Offers advice on handling the LCD screen to prevent damage.

Maintaining the LCD screen

Guides on cleaning the LCD screen using a soft dry cloth.

Display information

Lists menu screens and their corresponding page numbers.

Glossary

Defines various terms used in the manual.

Specifications

General

Provides general specifications for power, dimensions, weight, and memory.

Navigation

Details GPS receiver, reception system, frequency, sensitivity, and aerial specifications.

Display

Lists display specifications like screen size, pixels, and backlight.

Audio

Provides audio specifications including maximum power, continuous output, impedance, and equalizer details.

USB

Lists USB specifications for the head unit and detachable device.

Bluetooth

Provides Bluetooth specifications including version and output power.

FM tuner

Lists FM tuner specifications like frequency range, sensitivity, and distortion.

Related product manuals