Pioneer AVIC-F310BT - Setting automatic connection; Editing the device name

Setting automatic connection
When automatic connection is active, the na-
vigation system will automatically establish a
connection with a registered phone when it
comes into range. Using this feature avoids all
of the processes for establishing a connec-
tion.
p With some mobile phones, it may not be
possible to perform automatic connection.
1 Touch [Settings] on the “Phone Menu”
screen.
The “Bluetooth Settings” screen appears.
2 Touch [Auto Connect].
Touching [Auto Connect] switches between
[On] and [Off].
p Automatic connection is performed in the
registration number order.
p Some mobile phones do not support auto-
matic connection.
Editing the device name
You can change the device name to be dis-
played on your mobile phone. (Default is
[PIONEER NAVI].)
1 Touch [Settings] on the “Phone Menu”
screen.
The “Bluetooth Settings” screen appears.
2 Touch [Edit Name].
The keyboard to enter the name appears.
3 Touch
to delete the current name,
and enter the new name by using the key-
board.
4 Touch [OK].
The name is changed.
p Up to 16 characters can be entered for a de-
vice name.
Notes for hands-free phoning
General notes
! Connection to all mobile phones featuring
Bluetooth wireless technology is not guar-
anteed.
! The line-of-sight distance between this na-
vigation system and your mobile phone
must be 10 metres or less when sending
and receiving voice and data via Bluetooth
technology. However, the actual transmis-
sion distance may be shorter than the esti-
mated distance, depending on the usage
environment.
! With some mobile phones, the speakers of
the system may not produce a ring sound.
! If private mode is selected on the mobile
phone, hands-free phoning may be dis-
abled.
Registration and connection
! Mobile phone operations vary depending
on the type of mobile phone. Refer to the
instruction manual that came with your
mobile phone for detailed instructions.
! With mobile phones, phone book transfer
may not work even though your phone is
paired with the navigation system. In that
case, disconnect your phone, perform pair-
ing again from your phone to the naviga-
tion system, and then perform the phone
book transfer.
Making and receiving calls
! You may hear a noise in the following situa-
tions:
— When you answer the phone by using
the button on the phone.
— When the person on the other end of
line hangs up the phone.
! If the person on the other end of the phone
call cannot hear the conversation due to an
echo, decrease the volume level for hands-
free phoning. This may reduce the echo.
! With some mobile phones, even if you
press the accept button on the mobile
phone when a call comes in, hands-free
phoning may not be performed.
Using hands-free phoning
Engb
63
Chapter
11
Using hands-free phoning