Exporting data for
“NavGate FEEDS”
You can export data to an SD memory card for
browsing on a PC.
The following data can be exported.
! Fuel details
! Drive Log
Fuel details
Entering the fuelling information
p Up to 24 sets of “Fuel details” entries can
be stored. You can also export the data, as
described below.
If the entries reach the maximum number,
a new entry will overwrite the oldest one.
Fuel details function only assists you to calcu-
late your average mileage based on the infor-
mation you input. The function does not
receive data directly from the vehicle.
1 Display the “Navigation Menu” screen.
2 Touch [Fuel details].
The “Fuel details” screen appears.
3 Touch [Fuel Price].
The “Fuel Price Calculation” screen appears.
4 Enter the following settings:
! [Distance]:
Enter the distance travelled since the pre-
vious fuelling.
p The distance is entered automatically
only when the distance travelled since
the previous fuelling is recorded.
! [Fuel Pumped]:
Enter the amount of fuel pumped.
! [Fuel Price/Unit]:
Enter the fuel unit price.
When all the items are entered, the fuel con-
sumption is displayed next to “Fuel details”.
5 Touch [OK].
The “Fuel Price Calculation” screen appears.
And then touch [OK] to display the “Fuel de-
tails” screen.
Exporting the data of “Fuel details”
Exporting the “Fuel details” data to an SD
memory card is possible.
p The data stored in this navigation system
will be cleared as exporting it to the SD
memory card.
Other functions
Engb
71
Chapter
13
Other functions
To Next Page
Loading...
