Why is the picture of the TV screen fluctuated when Pioneer CDJ-400 - Cd/Media Player is on?
If the picture on your TV screen is fluctuating or FM broadcast is interfered with noise, it is likely due to interference from the CD player. Turn off the power switch of the player, or move the player away from the TV or tuner.
Why back cue function cannot be carried out even though the CUE button is pressed in playback mode on my Pioneer CDJ-400 - Cd/Media Player CD Player?
If the back cue function cannot be carried out even though the CUE button is pressed in playback mode on your Pioneer CD Player, it could be because the cue point is not set yet. Alternatively, if you are playing an MP3 file, back cue is possible only within the same folder.
Why pressing the OUT/OUT ADJUST button does not start loop play on my Pioneer CDJ-400 - Cd/Media Player CD Player?
If pressing the OUT/OUT ADJUST button does not start loop play on your Pioneer CD Player, no cue points (loop-in points) may have been set. In the case of MP3, loop cannot be performed if no loop-in point is located within the currently playing track. During playback of MP3s, looping is possible only within the same track that has a cue point (loop-in point) set.
General| Signal-to-Noise Ratio | 115 dB |
|---|---|
| Total Harmonic Distortion | 0.006% (JEITA) |
| USB Ports | 1 x USB-A |
| Jog Wheel Size | 115 mm |
| Hot Loop | Yes |
| Quick Return | Yes |
| BPM Counter | Yes |
| Slot-In CD Loading | Yes |
| MP3 Folder Search | Yes |
| Display | LCD |
| Power Supply | AC 220-240V, 50/60 Hz |
| Media Type | CD, CD-R, USB |
| Frequency Response | 4 Hz - 20 kHz |
| Weight | 2.7 kg |
| Jog Wheel Type | Touch-sensitive |
| Tempo Control Range | +/- 6%, +/- 10%, +/- 16%, WIDE |
| Playable File Types | MP3 |
| Audio Outputs | 1 x Stereo RCA |
| Dimensions | 217.9 mm x 296.3 mm x 107.5 mm |
To Next Page