Pioneer CT-W701R Service Manual

CT-W801R, CT-W851R, CT-W701R
9.2 LC7570 (IC510)
@
Port
arrangement
8]
S| 3]
3 | NI
S| 3] 3
LEVEL20
(CRO2) LEVEL10
(Not used) EQ12
(Not used) £013
(RECSEL 1) EQ10 (RECSEL 2) EQ11
(METAL) LEVEL11
(Not used) LEVEL12 |3|
(Not used) BIAS22
(Not used) BIAS23
(Not used) LEVEL13
The( _) contains the pin names for CT-W701R.
@ Terminal descriptions
Descriptions
[Nene [ cine |
See terminal bit 2 for 1 mechanism AUTO
BLE EQ correction (CT-W701R is mot used)
Output terminal bit 1 for 1 mechanism AUTO
BLE EQ correction (CT-W801R, W.851R)
Clock input terminal RECSEL2 eewrol Fa mechanism select output terminal
‘ : Output terminal bit 0 for 1 mechanism AUTO
Data input terminal BLE EQ correction (CT-W801R, V851R)
VCBV +5V power supply terminal EWR) mechanism select output terminal
Output terminal bit 3 for 1 methanism AUTO
27 LEVEL13 BLE LEVEL correction (CT-W70/F is not used)
Output terminal bit 2 for 1 methanism AUTO
BLE LEVEL correction (CT-W70/F@ is not used)
Output terminal bit 1 for 1 methanism AUTO
LEVEL11 BLE LEVEL correction (CT-Wa0iF®, W851R)
Recording system METAL auo tape select
METAL output terminal (CT-W701R) j
Output terminal bit 0 for 1 mehanism AUTO
LEVEL10 | BLE LEVEL correction (CT-W80iF®, W851R)
CRO2 Recording system CRO2 aut tape select
output terminal (CT-W701R)
Pull-down resistor COMMON terminal
Output timing input terminal
BLK Output stop input terminal
LEVEL12
REC/PB head switching output terminal
"H” during playing back 2 mechanism
Al Playback equalizer switching output terminal
"L" at HI position
Output terminal for 2 mechanism BIAS
oscillation
Output terminal for 1 mechanism BIAS Output terminal bit 1 for 1 mehznism AUTO
1BIAS oscillation 31 BIAS11 BLE BIAS correction (CT-W701R iss not used)
Frequency switching output terminal 1 for Output terminal bit 0 for 1 mehwanism AUTO
FSEL1 AUTO BLE 32 BIAS10 BLE BIAS correction (CT-W701Riss not used)
Output terminal bit 1 for 2 mehanism AUTO
BLE BIAS correction
Output terminal bit 0 for 2 mehanism AUTO
BLE BIAS correction
BIAS20
Output terminal bit 3 for 2 mehanism AUTO
BLE EQ correction
Dolby switching output terminal 2
Output terminal bit 2 for 2 mehzanism AUTO
BLE EQ correction
DOL1
DOL2
TOCD CD control signal output terminal
at ae d switching output terminal 0 for
FSELO hoe 33 BIAS21
Dolby switching output terminal 1
Constant switching output terminal at meter Output terminal bit 1 for 2 mehaanism AUTO
REFAST | | amplifier FAST="H", SLOW="L" 37 EQ21 BLE EQ correction
EQ20 Output terminal bit 0 for 2 mehezanism AUTO
BLE EQ correction
Output terminal bit 3 for 2 menzanism AUTO
LEVEL23 | BLE LEVEL correction
Output terminal bit 2 for 2 meheanism AUTO
LEVEL22 BLE LEVEL correction
Output terminal bit 1 for 2 menzanism AUTO
LEVEL21 | BLE LEVEL correction
Output terminal bit 0 for 2 meneanism AUTO
LEVEL20 BLE LEVEL correction :
Surround EQ output terminal 2
Surround EQ output terminal 1
Surround EQ output terminal 0
FADE
Fade out output terminal
cee terminal bit 3 for 1 mechanism AUTO
BLE EQ correction (CT-W701R is not used)

Pioneer CT-W701R Specifications

General

Track System	4-track, 2-channel stereo
Frequency Response (Metal Tape)	20 Hz - 20 kHz
Tape Type	Normal, Chrome, Metal
Type	Double Cassette Deck
Heads	2 x playback
Input	Line In
Output	Line Out
Inputs	Line In: 80 mV
Outputs	Line Out: 0.5 V
Power Supply	AC 220-240 V
Signal to Noise Ratio	70 dB
Signal-to-Noise Ratio	70 dB
Wow and Flutter	0.08% (WRMS)
Wow and Flutter (WRMS)	0.08%