99
En
Useful Remote Control Features
13
English
Using the remote control unit to control
other devices
Receiver control buttons
When a Pioneer receiver is connected to the display, use
buttons 1 to 3 to operate the receiver.
When a non-Pioneer receiver is connected to the display, the
signals for 1 to 3 must first be “learned”. See page 92.
1RECEIVER (STANDBY/ON)
Turns the Pioneer receiver power On and Off.
2 RECEIVER INPUT
Selects the input source connected to the Pioneer
receiver.
3 RECEIVER VOL +/–
Adjusts the Pioneer receiver volume level
Press VOL + to increase the volume and VOL – to decrease
it.
NOTE
• The color-highlighted buttons on the remote control can
memorize the control signal from another device’s remote
control.
3
1
2
Mode switch
(with “TV”
selected)
PDP_PRO1540HD.book Page 99 Wednesday, August 2, 2006 6:01 PM
To Next Page
Loading...
Need help?
General