Pioneer MEP-7000 User Manual

CONNECTIONS
18
En
5. Connecting a computer
Make these connections in order to use the accessory DJS or other DJ software program.
6. Connecting the power cord
When all other connections have been completed, connect one end of the accessory power cord to the AC IN jack on the rear side of
the drive unit, and the other end to a normal AC power outlet, or the auxiliary power outlet of an amplifier.
NOTE
• Use only the furnished accessory USB cable.
Drive unit
Computer
Accessory
USB cable
Do not connect until you have installed the required driver
in your computer. See “ABOUT THE DRIVER PROGRAM”
(P.51).
MEP-7000_KU_EN.book 18 ページ ２００９年２月１２日 木曜日 午後３時１５分

Pioneer MEP-7000 Specifications

General

Frequency range	4 - 20000 Hz
Channels quantity	- channels
Digital sound processing	- bit
Total Harmonic Distortion (THD)	0.006 %
Dimensions (WxDxH)	483 x 325 x 91 mm
Power consumption (typical)	33 W

Weight and Dimensions

Weight	6100 g