EasyManuals Logo

Pioneer MEP-7000 User Manual

Pioneer MEP-7000
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
ABOUT THE DRIVER PROGRAM
53
En
English
•If the [Hardware Installation] screen appears during
installation, click on [Continue Anyway] to continue the
installation process.
<For Windows 2000>
•If the [Digital Signature Not Found] screen appears during
installation, click on the [Yes] button to continue the
installation process.
Setting the buffer size
The MEP-7000’s drive unit has been designed as an audio device
compliant with ASIO (Audio Stream Input Output) standards.
To adjust the buffer size of the device, click on Windows [START]
[View All Programs] [Pioneer] [MEP-7000[SEP-C1]]
[MEP-7000 ASIO Settings Utility].
Confirming the driver version
To confirm the version of the loaded driver, click on Windows
[START] [View All Programs] [Pioneer] [MEP-
7000[SEP-C1]] [MEP-7000[SEP-C1] Version Display Utility].
Most recent version of driver
Consult the following website regarding the latest driver versions.
http://www.prodjnet.com/support/
When using this unit to control DJS software
Please read the sections “USING DJ SOFTWARE” (P. 54) and the
“DJS Control Guide” (PDF file) before attempting to actually use
this unit to operate DJS. The “DJS Control Guide” can be found
under the name [manual_MEP-7000_control_en.pdf] in the
[MEP-7000\English] folder of the accessory CD-ROM.
NOTE
Setting the buffer size to a higher value will help prevent
audio dropouts (interrupted sound), but the resulting audio
data latency may result in increased time lags.
•If the computer is currently running a program (DJ
software, etc.) that uses this unit as a default audio device,
close the program and then adjust the buffer size.
MEMO
This screen also allows you to confirm the version of the
firmware currently installed in this unit. However, the firmware
version will not be displayed if the unit is not connected to a
computer, or if the computer is not communicating properly
with the unit.
•The firmware version displayed on this screen as the unit’s
firmware will be either the control unit’s firmware or the drive
unit’s firmware, whichever is older.
MEP-7000_KU_EN.book 53 ペー 00年212 木日 後315

Table of Contents

Other manuals for Pioneer MEP-7000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pioneer MEP-7000 and is the answer not in the manual?

Pioneer MEP-7000 Specifications

General IconGeneral
Frequency range4 - 20000 Hz
Channels quantity- channels
Digital sound processing- bit
Total Harmonic Distortion (THD)0.006 %
Dimensions (WxDxH)483 x 325 x 91 mm
Power consumption (typical)33 W
Weight and Dimensions IconWeight and Dimensions
Weight6100 g

Related product manuals