Pioneer PD-M610 User Manual

Operating |
Instructions
MULTI-PLAY COMPACT DISC PLAYER
SI MONEER wummar comeacr owe maven PE MBI
Thank you for. buying this Pioneer product.
Please read through these operating instructions so you will
know how to operate your model properly. After you have
finished reading the instructions, put them away in a safe
place for future reference.
In some countries or regions, the shape of the power plug
and power outlet may sometimes differ from that shown in
the explanatory drawings. However, the method of con-
D-M610
oie
DIGITAL AUDIO
necting and operating the unit is the same.
WARNING :10 prevent FIRE OR SHOCK HAZ-
ARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
IMPORTANT NOTICE
[For U.S. and Canadian modeis]
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed war-
ranty card and keep it in a secure area. This is for your
security.
[For Canadian model]
CAUTION: to prevent ELECTRIC SHOCK DO
NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADES CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE.
ATTENTION: pour prevenin LES cHOcS
ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE
AVEC UN PROLONGATEUR UNE PRISE DE COURANT OU
UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES
PEUVENT ETRE INSEREES A FOND SANS EN LAISSER
AUCUNE PARTIE A DECOUVERT.
’This product is manufactured to comply with the radio inter-
ference requirements of EEC Directive 76/889/EEC and
82/499/ EEC.”
LINE VOLTAGE SELECTOR SWITCH
Only multi-voltage models are provided with this
switch. U.S., Canadian, European, U.K., and Austra-
lian models are not provided with this switch.
Mains voltages in Saudi Arabia are 127V and 220V
only. Never use this model with 110V setting in
Saudi Arabia.
The line voltage selector switch is located on the rear
panel of this player. Before your player is shipped from
the factory, the switch is set to the power require-
ments of the player's destination. Check that it is set
properly before plugging the power cord into the out-
let. If the voltage is not properly set or if you move
to an area where the voltage requirements differ, ad-
just the selector switch as follows:
e Use a medium-sized (flat-blade) screwdriver. Insert
the tip of the screwdriver into the groove of the
selector switch and turn it so that the power vol-
tage marking of your area points to the arrow.
VOLTAGE SELECTOR
@) PIONEER’
The future of sound and vision.

Pioneer PD-M610 Specifications

Power

power requirements (European models)	AC 220 V, 50/60 Hz
power requirements (U.K., Australian models)	AC 240 V, 50/60 Hz
power requirements (U.S., Canadian models)	AC 120 V, 60 Hz
power requirements (Other models)	AC 110/120 - 127/240 V, 50/60 Hz
power consumption	13 W

Operating Environment

operating temperature	5°C — +35°C

Audio Specifications

frequency response	4 Hz — 20 kHz (+0.5 dB)
signal-to-noise ratio	more than 104 dB
dynamic range	more than 95 dB
channel separation	more than 98 dB
harmonic distortion	less than 0.005%

Output

output voltage	2.0 V
wow and flutter	less than +0.001%

Weight and Dimensions

weight	5.1 kg
external dimensions	420(W) x 327(D) x 100(H) mm
external dimensions (inches)	16-9/16(W) x 12-7/8(D) x 3-15/16(H) in