Pioneer PD-M430 User Manual

MULTI-PLAY COMPACT DISC PLAYER
PD-MA435
PD-M431
PD-M430
Operating
Instructions
aise
DIGITAL AUDIO
PD-M430/PD-M431 PD-M435 ~
Thank you for buying this Pioneer product.
Please read through these operating instructions so you
will know how to operate your model properly. After you
have finished reading the instructions, put them away in a
safe place for future reference.
In some countries or regions, the shape of the power plug
and power outlet may sometimes differ from that shown in
the explanatory drawings. However, the method of
connecting and operating the unit is the same.
WARNING: To PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear panel.
Please write this serial number on your enclosed warranty card
and keep it in a secure area. This is for your security.
[For Canadian model]
CAUTION: To PREVENT ELECTRIC SHOCK DO NOT USE
THIS (POLARIZED) PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
ATTENTION: Pour PREVENIR LES CHOCS ELECTRIQUES
NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN
PROLONGATEUR, UNE PRISE DE COURANT OU UNE AUTRE
SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT ETRE
INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A
DECOUVERT.
“This product complies with the Radio Interference require-
ments of the EC (European Community) Directive 87/308/EEC. ”
THE POWER SWITCH IS SECONDARY CONNECTED AND
THEREFORE DOES NOT SEPARATE THE UNIT FROM MAINS
POWER IN STANDBY POSITION.
LINE VOLTAGE SELECTOR SWITCH
Only multi-voitage models are provided with thisswitch.
U.S., Canadian, European, U.K., and Australian models
are not provided with this switch.
Mains voltages in Saudi Arabia are 127V and 220V only.
Never use this model with 110V setting in Saudi Arbia.
The line voltage selector switch is located on the rear panel
of this player. Before your player is shipped from the factory,
the. switch is set to the power requirements of the player's
destination. Check that it is set properly before plugging
the power cord into the outlet. If the voltage is not properly
set or if you move to an area where the voltage requirements
differ, adjust the selector switch as follows:
e Use a medium-sized (flat blade) screwdriver. Insert the
tip of the screwdriver into the groove of the selector
switch and turn it so that the power voltage making of
your area points to the arrow.
VOLTAGE SELECTOR
220
ge
=. ’
7X;
s
°
®) PIONEER’
The future of sound and vision.
;
3

Pioneer PD-M430 Specifications

General

Brand	Pioneer
Model	PD-M430
Category	CD Player
Language	English

Summary

Important Notices and Voltage Settings

U.S. and Canadian Model Information

Serial number location for U.S. and Canadian models and safety warnings.

Canadian Model Shock Hazard

Caution for Canadian models regarding the polarized plug and outlets.

Line Voltage Selector Switch

Guide to the voltage selector, its location, and usage for different regions.

Important Safety Instructions

Electrical Safety and Precautions

Warnings about opening the unit, electric shock, and general safety guidelines.

Installation and Environmental Safety

Guidance on proper placement, ventilation, heat, and moisture avoidance.

Power Cord and Disc Handling Safety

Safe practices for power cords, disc care, and magazine handling.

Model-Specific Safety and Compliance

European/U.K. Laser Safety

Safety precautions for laser diode in European and U.K. models.

U.S. Model Radiation Hazard

Warnings about hazardous radiation exposure and eye safety for U.S. models.

FCC Interference Guidelines (U.S.)

Power Cord Safety Precautions

Handling and Maintenance Cautions

Connecting the Player

Audio Component Connections

Loading Discs and Magazine Labeling

Inserting Discs into the Magazine

Player Controls and Remote Functions

Front Panel Overview

Basic Playback Operations

Playing a Compact Disc

Steps to turn on the player and start disc playback.

Pausing and Stopping Playback

How to temporarily pause and stop disc playback.

Advanced Playback Operations

Disc and Track Searching

Playback Customization

Programming Specific Tracks/Discs

Program Playback Setup

Guide to programming a desired sequence of tracks or discs.

Program Playback Management

Programming a Pause

Program Contents Management

Deleting Tracks from Playback Programs

Delete Program Playback Procedure

Steps to select and delete unwanted tracks or discs from a playback program.

Clearing Delete Program Settings

Recording Assistance Features

Compu Program Editing for Recording

Recording Assistance: Fade Editing

Time Fade Editing Function

Troubleshooting Common Issues

Problem Diagnosis and Resolution

Lists issues like no sound, remote failure, and playback interruptions with their fixes.