07Basic Operations
English
29
En
•In 2-screen or picture-in-picture mode, press SWAP to
switch the position of the 2 screens shown.
Left screen is the active screen which will be indicated
by “ ”. The user is allowed to operate picture and
sound.
• In 2-screen mode, press SCREEN SIZE to change the
size of the left screen.
•In picture-in-picture mode, press SHIFT to move the
position of the small screen in anti-clockwise.
2
To select the desired input source, press the appropriate
input source button.
• If watching TV programs, press CH +/– to change the
channel.
• The multiscreen function cannot display images from the same input
source at the same time. If you make such an attempt, a warning
message appears.
• When you press HOME MENU or DTV INFO, the single-screen
mode is restored and the corresponding menu is displayed.
• When the two screens show the same analog broadcasting coming
through antenna A and B, the picture quality may differ between the
two screens.
Freezing images
Use the following procedure to capture and freeze one frame
from a moving image that you are watching.
Normal image Still image
1
Press FREEZE.
•A still image appears on the right screen while a
moving image is shown on the left screen.
2
Press FREEZE again to cancel the function.
•With the screen split, any image cannot be frozen.
• When this function is not available, a warning message appears.
To Next Page
Loading...
