Pioneer PDP-505HD - Page 71

PDP-505HD
71
Item Default Setting Remarks
Power(STAND-BY/ON) STANDBY
Input function INPUT1
Displaying size VIDEO: NATURAL WIDE For each input function
PC 1: ORIGINAL (including TYPE)
For INPUT 3, 4 ∩ PC signal mode
PC 2: 4: 3NORMAL (including TYPE)
The priority order is 1 = 2 = 3
PC 3: FULL (including TYPE)
V. POSITION VIDEO: 0 For each input function
AUTO SCREEN VIDEO: OFF Common for all input functions
HIGH CONTRAST VIDEO: OFF For each input function
PICTURE MODE ∗ STD (refer to next page) For each input function ∩ signal (VIDEO/PC) mode
(VIDEO) 0 For each INPUT 2, 3, 4
SCREEN
(PC) 0 For INPUT 3, 4 ∩ PC signal mode
(VIDEO) OFF Common for all input functions
POWER SAVE
(PC) OFF Common for INPUT 3, 4
VIDEO/COMPONENT 2 INPUT2
SIGNAL/FORMAT PC/RGB INPUT3
PC/RGB INPUT4
OFF INPUT3
G ON SYNC
OFF INPUT4
STILL OFF Common for all input functions
INPUT1 INPUT1
INPUT2 INPUT2
INPUT LABEL
INPUT3 INPUT3
INPUT4 INPUT4
MIRROR MODE OFF Common for all input functions
BRIGHT ENHANCE (VIDEO) ON Common for all input functions
(PC) OFF Common for INPUT 3, 4
BAUD RATE 4800BPS Common for all input functions
FAN CONTROL AUTO Common for all input functions
HOUR METER 0 Operation hour
Details of FINAL SETUP ( Factory default setting)
H POSI. : +10
DISP POSITION MODE 06–A/
Adjustment Parameter
Setting Value
Current Menu
Input Signal
DISP POSI. mode (Common for all input signal types and formats)
1 H POSI. Horizontal display position offset 0
2 V POSI. Vertical display position offset 0
3 H SIZE Horizontal screen size offset 0
8 V SIZE Vertical screen size offset 0
9 RGB MATRIX Switching between 1(Y/Pb/Pr) and 1
2 (Y/Cb/Cr)
Remote
Control Key
Adjustment
Parameter
Adjusting & Setting Item
Setting Value
Notes:
The RGB MATRIX setting is adjustable with the component signals except for 480i and 480p.
The above adjustments are also available on the user menu.