EasyManua.ls Logo

Pioneer SX-600L Service Manual

Pioneer SX-600L
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the Pioneer SX-600L and is the answer not in the manual?

Pioneer SX-600L Specifications

General IconGeneral
TypeStereo Receiver
Frequency Response20Hz to 20kHz
Tuning rangeFM, MW
Power Output30 W per channel (8 ohms)
Input SensitivityPhono: 2.5 mV, Line: 150 mV
OutputHeadphone
Speaker load impedance
Dimensions420 x 130 x 300mm
Weight7500g
Signal to noise ratio70 dB
Speaker Impedance8 ohms

Summary

1. SPECIFICATIONS

Amplifier Section

Detailed specifications for amplifier output, distortion, and frequency response.

FM Tuner Section

Sensitivity, selectivity, and signal-to-noise ratios for the FM tuner.

2. FRONT PANEL FACILITIES

4. BLOCK DIAGRAM

System Block Diagram

Illustrates the interconnected functional blocks of the receiver.

5. CIRCUIT DESCRIPTIONS

Tuner Circuit

Describes the FM and AM tuner sections, including front-end and IF stages.

Electronic Tuning System

Explains the LSI-based electronic tuning system, including terminal functions.

Audio Amp Section

Describes the EQ amplifier and power amplifier stages, including tone control.

7. ADJUSTMENTS

Tuner Section Adjustments

Procedures for adjusting tuning voltage, FM tuner, and FM multiplex decoder.

Power Amplifier Adjustment

Describes the adjustment procedure for the power amplifier output voltage.

10. ELECTRICAL PARTS LIST

Related product manuals