Pit Boss 10514 - User Manual

Questions and Answers

J
jeremy18Sep 7, 2025
What does "noP" error code mean on Pit Boss 10514 Grill?
- A
  Ashley AndrewsSep 7, 2025
  The "noP" error code on your Pit Boss Grill can indicate a few potential issues related to the meat probe. It could be due to a bad connection at the connection port. Try disconnecting the meat probe from the connection port on the Control Board and reconnecting it, ensuring the adapter is firmly connected and checking for any signs of damage. Alternatively, the meat probe itself might be damaged; inspect the wires for any signs of damage. If the issue persists, the Control Board may be faulty.
L
laratimothyAug 23, 2025
What to do if Pit Boss 10514 Grill temperature on SMOKE is too high?
- T
  tspencerAug 23, 2025
  If the temperature on the SMOKE setting of your Pit Boss Grill is too high, the "P" setting might be too low. To fix this, push the "P" SET button and increase the "P" setting.
M
Manuel HarringtonAug 25, 2025
Why Pit Boss 10514 Grill will not achieve or maintain stable temperature?
- D
  David WoodAug 25, 2025
  If your Pit Boss Grill isn't maintaining a stable temperature, several factors could be responsible. Insufficient airflow through the fire pot may be the cause; inspect the fire pot for ash build-up or obstructions, ensure the fan is working correctly and the air intake isn't blocked, and confirm the auger motor is functioning without blockages. A lack of fuel, poor fuel quality, or an obstruction in the feed system could also be the issue; check the fuel level in the hopper, and if the pellets are of poor quality or too long, remove them. The grill probe might also be dirty or damaged. If dirty, follow the cleaning instructions. Once these steps are complete, start the grill, set the temperature to SMOKE, wait for 10 minutes, and check that the flame is bright and vibrant.
B
Brandi Wheeler MDAug 26, 2025
How to prevent frequent flare-ups in Pit Boss 10514 Grill?
- S
  Scott RichmondAug 27, 2025
  To prevent frequent flare-ups in your Pit Boss Grill: 1. Try cooking at a lower temperature, keeping it under 176°C / 350°F when cooking highly greasy food. 2. Address grease build-up on cooking components by following the care and maintenance instructions.
D
Donald JamesAug 27, 2025
Why is my Pit Boss 10514 producing too much smoke?
- T
  Tracy CaldwellAug 27, 2025
  If your Pit Boss Grill is producing excessive or discolored smoke, several factors could be the cause. Start by checking for grease build-up and cleaning the grill. Also, inspect the quality of the hardwood pellets; remove any moist pellets and replace them with dry ones. A blocked burn pot can also cause this issue, so clear it of any obstructions. Finally, ensure the fan has sufficient air intake and is free from blockages. Follow the maintenance instructions to clean the fan if necessary.
A
Alyssa BrownSep 23, 2025
What do flashing dots on Pit Boss Grill LCD screen mean?
- C
  Carolyn RiggsSep 23, 2025
  The flashing dots on the LCD screen of your Pit Boss Grill simply indicate that the unit has power and is in Start-Up mode, meaning the igniter is on. This is normal and not an error. The igniter will turn off after five minutes, and once the flashing dots disappear, the grill will begin adjusting to the selected temperature.
J
Jennifer RaySep 17, 2025
What does the "noP" error code mean on Pit Boss 10514?
- C
  Calvin MeyersSep 17, 2025
  The "noP" error code on your Pit Boss Grill indicates a problem with the meat probe connection. First, disconnect the meat probe from the connection port on the Control Board and reconnect it, ensuring the adapter is firmly connected and checking for any damage. If the issue persists, inspect the meat probe wires for damage. If the probe is damaged or the problem continues, contact Customer Care for a replacement part. In some cases, this error can also indicate a faulty control board, which would also require contacting Customer Care for a replacement.
A
Austin ThorntonSep 18, 2025
What does "Err" error code mean on a Pit Boss 10514 Grill?
- F
  fpattersonSep 18, 2025
  The "Err" error code on your Pit Boss Grill suggests that the grill probe wire is not making a proper connection. To resolve this, remove the access panel and inspect the grill probe wires for any damage. Also, ensure that the grill probe molex connectors are firmly and correctly connected to the Control Board.
C
Christopher GillSep 6, 2025
What does "ErP" error code mean on Pit Boss 10514 Grill?
- L
  Lori LarsonSep 6, 2025
  The "ErP" error code on your Pit Boss Grill indicates that the unit was not turned off properly when last connected to power. As a safety feature to prevent an automatic restart, press the Power Button to turn the unit off, wait two minutes, then press it again to turn the unit back on. Turn the Temperature Control Dial to SMOKE or your desired temperature. If the error code continues to display, further assistance is needed.
E
emichaelSep 3, 2025
What does flashing dots on Pit Boss 10514 Grill LCD screen mean?
- Q
  qthomasSep 3, 2025
  Flashing dots on the LCD screen of your Pit Boss Grill indicate that the unit has power and is in Start-Up mode with the igniter on. This is not an error. The igniter will turn off after five minutes, and once the flashing dots disappear, the grill will begin adjusting to the selected temperature.

Summary

Product Safety and Warnings

General Safety Precautions

Covers clearance, fire, storage, child safety, and disposal of ashes.

Fuel and Material Hazards

Covers pellet fuel, creosote, carbon monoxide, and ashes.

Parts and Assembly Guide

Step-by-Step Assembly Instructions

Grill Operation and Settings

Control Board and Startup Procedures

Care and Maintenance

Cleaning Procedures and Tips

Wood Pellet Fuel Usage

Cooking Guidelines and Techniques

Troubleshooting and Problem Solving

Common Operational Issues

Covers power, ignition, fire pot, and LCD errors.

Performance and Temperature Problems

Covers temp stability, flare-ups, and performance issues.

Replacement Parts and Warranty

Pit Boss 10514 Specifications

General

Type	Pellet Grill
Temperature Range	180°F to 500°F
Hopper Capacity	8 lbs
Weight	90 lbs
Fuel Type	Wood Pellets
Number of Burners	1
Grate Material	Porcelain-coated cast iron
Material	Steel
Warranty	5 years
Cooking Area	1050 sq in
Total Cooking Area	1050 sq in
Primary Cooking Area	770 sq in
Ignition	Electronic