Section One: ASSEMBLY INSTRUCTIONS
ATTACHING THE SIDE SHELF HANDLE
Installation Steps
Part Needed:
Hardware Required:
Using your wrench secure all four screws (A)
through the handle (7) and insulated felt
spacers, onto the barrel.
Ensure a tight fit, without over tightening.
# 7 Side Handle—340
Or Stainless Tray Holder— 420D
2 Insulated Felt Spacers
4
ATTACHING THE GREASE BUCKET ATTACHING THE SERVING TRAY
IMPORTANT: DO NOT use the Chrome Side Shelf Handle to move or lift the unit.
Because of the size, it will break. This is not a warranty item.
Screw 1/4”- 20* 1/2” x 4 (A)
Page 10
COOKING GRIDS (2)
Your Pit Boss Deluxe grill comes with Cast Iron cooking grids. Cast Iron is
an excellent heat absorber and is still the best way to produce those “steak
house’ sear markings.
Place this Porcelain Coated steel grid on to the two brackets found
on either end of the barrel
NOTE: To maintain the searing and grilling performance of your cook-
ing grids, as well as their longevity, some special care and maintenance
Is required as with any cast iron cooking tools.
UPPER COOKING RACK (1)
PLACING THE COOKING COMPONENTS
To Next Page
Loading...
Need help?
General
