Section One: ASSEMBLY INSTRUCTIONS
ASSEMBLING THE LEG KIT
Page 7
Tools Required:
Installation:
Step 1 Attach bottle opener to the leg
Step 2 Attach casters to the legs
Step 3 Attach legs to bottom shelf
NOTE: It is best to start each threaded screw by hand, to ensure
the thread DOES NOT cross thread or strip.
Parts Needed:
#9 3 x legs
#10 1 x leg w/ extra holes
#13 4 x Casters
#11 Bottom Shelf
#10 1 x leg
w/ extra holes
To Next Page
Loading...
