Pit Boss PB700S - Attaching Leg and Grill Assembly

Section One: ASSEMBLY INSTRUCTIONS
ATTACHING LEG AND GRILL ASSEMBLY: - for S models only
Tools Required:

Installation Steps
Page 8
Hardware Required:



 
WARNING! Due to the size and weight of
the upper grill, the following
installation step is a two (2)
person job.

NOTE: Damaged caused due to ignoring
warning or improper installation is
NOT a warranty issue.
Step 1 Attach The Grill And Leg Assembly
 
Note: 
 






 
 
 
 


 
 



NOTE: It is best to start each threaded screw by hand, to
ensure the thread DOES NOT cross thread or strip.



 
Note: 

PROCEED TO PAGE 12