Section One: ASSEMBLY INSTRUCTIONS
ASSEMBLING & MOUNTING THE LEGS & SHELF
Tools Required:
1—7/16” Open End Box Wrench
1– Adjustable Crescent Wrench
Or
1– Phillips Screwdriver
Installation Steps
2 Legs w/ axels
Step 1 Attach legs to barrel:
To ease installation, gently lay the barrel on its end,
not th
e hopper end.
A piece of cardboard or blanket should be placed under
the grill to prevent scratching the finish.
Usi
ng the proper tool, install the 2 legs WITHOUT the
wheel axles to the top of the barrel. (hopper
end)
Part # 11a & 11b
Reminder: Leg with Bottle Opener faces out toward
the front of the grill.
Fasten all four 1/4” - #20 x 3/5” screws (AA) through the
four pre-drilled screw holes both on the leg and
on the bottom of the barrel. Hand start, then use tool.
FASTEN ONLY, DO NOT TIGHTEN AT THIS POINT.
THIS ALLOWS FOR EASIER INSTALLATION OF
BOTTOM SHELF.
Install the 2 legs WITH the
wheel axles to the bottom of
the barrel. Part # 8
Fasten all four 1/4” - #20 x 3/5” screws (AA) through
the four pre-drilled screw holes both on the leg and
on the bottom of the barrel. Hand start then use tool.
FASTEN ONLY, DO NOT TIGHTEN AT THIS POINT.
Page 7
Parts Needed:
Hardware Required:
2 Legs
2 Metal Wheels
1 Bottom Shelf
820FB—Open Grid
820Deluxe—Solid
11a
11b
8
Screw 1/4”- 20* 3/5” x 20 (AA)
Lock Nuts 7/16” x 2 (BB)
Washer 12.5 x 24 x 2 (CC)
To Next Page
Loading...
