Pit Boss PB820FBC User Manual (English)

Questions and Answers:

A
Amanda HansenAug 18, 2025
What to do if my Pit Boss PB820FBC displays "ErH" Error Message?
- E
  Edward ChangAug 18, 2025
  If your Pit Boss Grill displays an "ErH" error message, it indicates that the grill has overheated, possibly due to a grease fire or excess fuel. To resolve this: 1. Turn the grill OFF and allow it to cool. 2. Clean the grill interior and remove excess pellets. 3. Confirm the correct positioning of all component parts. To clear the error, turn the temperature dial OFF, OPEN the lid, wait 3 or 4 minutes, then select your desired temperature.
T
trevoringramAug 22, 2025
What to do if my Pit Boss Grill displays "ErR" Error Message?
- F
  fullerjoshuaAug 22, 2025
  If your Pit Boss Grill displays an "ErR" error message, it indicates that the temperature probe wire is not making a proper connection. Ensure the probe wire is correctly connected to the control, confirm wire connections, and check for any damage.
K
Katherine GonzalezAug 25, 2025
What to do if my Pit Boss PB820FBC displays "ErP" Error Message?
- S
  Sylvia GarciaAug 25, 2025
  If your Pit Boss Grill displays an "ErP" error message, it could be due to one of two reasons. Either the temperature dial was not in the OFF position when the grill was connected to AC power, or a power outage occurred while the grill was operating. In either case, turn the temperature dial to OFF, wait 2 minutes, and then select your desired temperature.
J
Jaime McbrideAug 27, 2025
Why is my Pit Boss PB820FBC Grill temperature when set at SMOKE is too high?
- M
  matthew38Aug 27, 2025
  If your Pit Boss Grill temperature is too high when set to SMOKE, the "P" setting may be too low. To correct this, turn the temperature dial to SMOKE and push the "P" SETTING button to INCREASE the "P" setting.
T
Thomas MitchellAug 30, 2025
Why is my Pit Boss PB820FBC flashing temperature on LCD Screen?
- T
  Terry SnowAug 30, 2025
  A flashing temperature on the LCD screen of your Pit Boss grill is not an error. It indicates a potential risk of the fire going out. If in SMOKE mode and the grill temperature is below 43°C / 110°F, or in COOK mode and below 65°C / 150°F, check the hopper for sufficient fuel or blockage. Also, inspect the burn grate and pot for ash build-up or obstructions, check the fan for proper operation and speed, and confirm the auger motor is working.
K
katherine21Sep 3, 2025
What to do if my Pit Boss PB820FBC Grill procedures excess or discolored smoke?
- R
  Rachel HarrisSep 3, 2025
  Excessive or discolored smoke from your Pit Boss Grill can stem from several factors. Check and clean the interior grilling area, doing a controlled burn off of hidden excess grease after cooking greasy foods is a good practice. Also, inspect the wood pellet quality, clearing the hopper and burn pot of moist pellets and replacing them with fresh, dry ones. Finally, check the burn pot for fuel build-up.
M
mcraigSep 5, 2025
Why Pit Boss Grill will not achieve or maintain stable temperature?
- K
  Karen WhiteSep 6, 2025
  If your Pit Boss grill struggles to achieve or maintain a stable temperature, several factors could be responsible. First, check the burn pot for ash build-up or obstructions, and ensure sufficient airflow. Also, confirm the fan is working correctly, the air intake isn't blocked, and there's no blockage in the auger tube. Perform a quick test by removing cooking grids and the flavor/grease plate, starting the grill, setting the temperature to pre-heat, and waiting 10 minutes to see if the flame is bright and vibrant. Insufficient or poor fuel can also cause this issue, so check the hopper for sufficient fuel and assess the fuel's size, dampness, and sawdust content. Clean the temperature probe. Finally, ensure the "P" setting is correct.
D
Devin HarrisSep 8, 2025
What causes frequent flare-ups in my Pit Boss Grill?
- J
  Jennifer CarpenterSep 8, 2025
  Frequent flare-ups in your Pit Boss Grill can be caused by the cooking temperature being too high. When cooking highly greasy food, keep the temperature under 176°C / 350°F.
T
tryanSep 12, 2025
What does it mean if my Pit Boss PB820FBC Grill displays unexpected temperature?
- R
  rbrownSep 12, 2025
  An unexpected temperature displayed on your Pit Boss Grill can occur if the grill is exposed to high ambient temperatures and direct sunlight. If the interior temperature reaches or exceeds 54°C / 130°F, it won't harm the unit. Place the unit in a shaded area and prop the lid open to reduce the inside temperature.