Ultrasonic Sensor:
Enables a robot to measure
distance to an object and
respond to movement
DC Motor:
12-volt DC motor that
features 152 rpm and
320 oz-in. of torque
Standard Servo Motor:
Allows for exact
positioning within a
180-degree range of
motion
Motor Shaft Encoder:
Allows you to program the DC motors using both rotation
and degrees. Please note: The TETRIX Motor Shaft Encoder
Pack does not come as part of the robotics set and requires an
additional purchase.
Line Finder Sensor:
Enables a robot to follow
a black line on a white
background or vice versa
Powerpole Motor Cable:
Connects the DC Motor to
the power source
Continuous Rotation
Servo Motor:
Allows for continuous
direction of movement,
both forward and backward
Sensor:
A device that detects and responds to surrounding environmental factors
Motor:
A machine that produces motion or power for completing work
Encoder:
A sensing device that converts motion to an electrical signal that is read by the PRIZM controller to determine position,
count, speed, or direction of the TETRIX DC Motors
4 Getting Started
To Next Page
Loading...
