6 - ATR121 - User manual
Introduction
Thank you for choosing a Pixsys controller.
Versions with three digits display are available and the
device fits a wide range of applications with the most diverse
sensors like temperature/humidity/pressure sensors or linear
potentiometers.
Output options include both relay and SSR logic, but it is
possible to configure the unit also as indicator for installations
that do not require control or alarm ouputs.
PID and Autotune allow to adapt the regulation algorithm
to the installation , while LATCH ON function speeds up the
device calibration when linear potentiometers are used.
As on the latest Pixsys instrumentation, the configuration is
further simplified by the Memory cards which are provided
with internal battery and therefore do not require cabling to
power the controller.
1
Safety guidelines
Read carefully the safety guidelines and programming
instructions contained in this manual before connecting/
using the device.
Disconnect power supply before proceeding to hardware
settings or electrical wirings to avoid risk of electric shock,
fire, malfunction.
Do not install/operate the device in environments with
flammable/explosive gases.
This device has been designed and conceived for industrial
environments and applications that rely on proper safety
conditions in accordance with national and international
regulations on labour and personal safety. Any application
that might lead to serious physical dama ge/ life risk or involve
medical life support devices should be avoided.
Device is not conceived for applications related to nuclear
power plants, weapon systems, flight control, mass transpor-
To Next Page
Loading...
Need help?
General
