Need help?Do you have a question about the Pixsys ATR 141 and is the answer not in the manual?
General| Type | Temperature Controller |
|---|---|
| Series | ATR 141 |
| Input Type | Thermocouple, RTD |
| Output Type | Relay, SSR, Analog |
| Power Supply | 100...240Vac ±10% |
| Storage Temperature | -20°C to +70°C |
| Weight | 150 g |
| Display | 2-line, 4-digit LED display |
Describes the controller's display and key functions for operation and data entry.
Wiring diagram for low voltage power supply options for ATR121/ATR141.
Wiring diagram for mains voltage power supply options for ATR121/ATR141.
Details for connecting analogue inputs to the AN1 module.
Wiring examples for various linear signal inputs.
Specifications and capabilities of the relay outputs.
Specifications and capabilities of the SSR output.
Sets the proportional band width of the process, expressed in units.
Sets the integral time to remove steady-state error signals.
Sets the derivative time, reacting to changes in measured value.
Configures the auto-tuning mode: disabled, automatic, or manual start.
To Next Page
