43
23 - CONFIGURATION MEMORANDUM
Date: Model ATR121/141:
Installer: Plant:
Notes:
Par. Description Default Prom.
Select type of command output
Sensor Type
Visualization of decimal point
Lower limit of setpoint
Upper limit of setpoint
ATR121
ATR141
Lower limit only for V/I V/mA
Upper limit only for V/I V/mA
Latch On Function
Offset calibration
Gain calibration
Type of action
Type of contact for control output
in case of anomaly
Select state of OUT1
Hysteresis dead/band
Proportional band
Integral time
Derivative time
Proportional cycle time
Type of alarm
Contact alarm OUT
To Next Page
Loading...
