Pixsys ATR 121 Series - Configuration Parameters; Command Output

User manual - ATR121 - 27
Press Display Do
5
| +
§ and ¶
Increase or decrease
the value displayed by
pressing firstly
| and
then an arrow key.
Enter the new data
which will be saved
on releasing the keys.
To change another
parameter return to
point 4.
6
!
End of configuration
parameter change.
The controller exits
from programming.
11 Configuration parameters
01
c.ou
Command output
Selects command output type.
o1 . 2
> Default (factory defaults)
o1 . S
SSr
o 2.1
Ser
(Alarm not available with this selection)
Command Alarm
o1 . 2
Q1 Q2
o1 . S
Q1 SSR
SSr
SSR Q1
o 2.1
Q2 Q1
Ser
Q1 (open) Q2 (close), SSR
(close) for -T version
-