Need help?Do you have a question about the Pixsys ATR226 and is the answer not in the manual?
General| Type | Temperature Controller |
|---|---|
| Output Type | Relay, SSR |
| Display | Dual 4-digit LED |
| Input Type | Thermocouple, RTD |
| Size | 48x48 mm |
| Operating Temperature | 0 to 50°C |
| Communication | RS485 |
Specifications like displays, operating temperature, material, and weight.
Diagrams and explanations for power supply, analogue input, and sensor connections.
Diagrams for relay outputs, SSR output, and digital input wiring.
Explanation of the main and secondary display indicators.
Description of the status lights and their meaning.
Details on the functions of the Up, Down, and Set buttons.
How to change the main setpoint and alarm setpoint values using the keyboard.
Procedure for automatic tuning to calculate regulation parameters.
Manual procedure for adjusting PID algorithm parameters.
Automatic tuning for clear regulation without PID knowledge.
Function to follow a gradient to reach the setpoint at startup.
Selecting automatic or manual control of the output percentage.
Description of digital input functions and their configuration.
Procedure to restore the device to its factory settings.
Parameters for sensor input, decimal point display, and degree type.
Parameters for command output, action type, PID, setpoints, and calibration.
Parameters for error handling, setpoint protection, reset, delay, and softstart.
Parameters for digital input contact type and Alarm 1 settings.
Parameters for Alarm 1 reset/delay and Alarm 2 selection.
Parameters for Alarm 2 settings and PID tuning.
Advanced PID tuning parameters like deviation, gap, band, and integral time.
Illustrations and descriptions of absolute and band alarm modes.
Illustrations and descriptions of upper and lower deviation alarm modes.
Summary of parameters related to Alarms, PID, and output controls.
To Next Page
